I have another card to share with you featuring the beautiful new Filigree Frames & Borders dies from Heartfelt Creations. The Rectangle Filigree Frame Die works perfectly with the new Hollyhock Garden collection to create a beautiful garden scene.
Today’s project was created with products provided by Heartfelt Creations.
Scroll down past the photos for instructions on how to make this card.
Instructions:
Cut a piece of Deluxe Flower Shaping Paper 10” x 7”, score at 5” along the long side and fold to create a base card of 5” x 7”. Cut a piece of gold cardstock 5” x 7” and adhere to the front of the card. Cut a piece of green pattern paper 4 7/8” x 6 7/8” and adhere to the front of the gold cardstock.
Die cut two outer decorative frames using the No. 1 die from the HCD2-7424 Rectangle Filigree Frame Die – one out of Deluxe Flower Shaping Paper and one out of gold cardstock. Adhere the white decorative frame over the gold frame slightly offsetting the dies and then adhere to the front of the card. Die cut two medium decorative frames using the No. 2 die from the HCD2-7424 Rectangle Filigree Frame Die – one out of Deluxe Flower Shaping Paper and one out of gold cardstock. Adhere the white decorative frame over the gold decorative frame slightly offset them before adhering to the card front inside the outer frame.. Die cut the pattern paper using the No.2 die from the HCD2-7424 Rectangle Filigree Frame Die and adhere the inner panel inside the frame as shown.
Stamp the fence from the HCPC-31001 Hollyhock Fence Cling Stamp Set in Black Onyx ink on Iris cardstock. Colour the fence with Zig Clean Colour Real Brush Markers and die cut with the coordinating die. Trim the fence in half and adhere to the base of the inner decorative die with foam tape.
Trim the sentiment from the paper collection and adhere to the centre of the frame as shown.
Stamp the small leaf images from the HCPC-3999 Hollyhock Petals & Leaves Cling Stamp Set in English Ivy ink on Deluxe Flower Shaping Paper. Colour with Leaf Green ink and die cut with the coordinating dies. Colour the backs with Leaf Green ink and shape using the coordinating mold. Add Crystal Clear glitter using clear gloss gel medium and adhere to the base of the fence.
Stamp the flower images from the HCPC-3999 Hollyhock Petals & Leaves Cling Stamp Set in Sunflower and Magenta Hue inks. Colour the petals and backs of the yellow flowers with Citrus Burst ink and the centres with Lilac Posies ink and die cut with the coordinating dies. Colour the petals and backs of the Magenta Hue flowers with Cotton Candy ink. Shape using the coordinating mold. Add the flowers to the leaves with the larger flowers on the bottom and the smaller flowers at the top of the gate as shown. Add Hot Mama Prills to the centres of the flowers and then add Crystal Clear glitter using clear gloss gel medium.
Stamp the butterfly and birds images from the HCPC-3965 Summer Wreath Accents Cling Stamp in Jet Black ink on Iris Cardstock. Colour the images using Zig Clean Colour Real Brush Markers and die cut with the coordinating dies. Adhere to the card as shown.
To finish add Crystal Ultrafine Glitter using Dries Clear glue to the floral images on the paper and dot on the back ground of the paper.
Other Products Used:
Iris cardstock, Versafine Black Onyx ink, foam tape, clear gloss gel medium, paintbrush, Altenew inks – Cotton Candy and Citrus Burst
Cut a piece of white cardstock 10” x 5”, score at 5” along the long side and fold to create a base card of 5” x 7”. Cut a piece of gold cardstock 5” x 7” and adhere to the front of the card. Cut a piece of red patterned paper 4 7/8” x 6 7/8” and adhere to the front of the card. Cut a piece of gold cardstock 4 5/8” x 6 5/8” and adhere to the front with a piece of 4 1/2” x 6 1/2” heavy cardboard. Cut a piece of light green patterned paper 4 1/2” x 6 1/2″ and adhere to the gold cardstock. Cut four corners from the HCD1-7213 Elegant Pocket Accents Die set out of gold cardstock and adhere to the four corners as shown. Die cut the outer decorative oval from the HCD1-7305 Ornate Ovals Die set out of gold cardstock and adhere to the front of the card with heavy cardboard. Die cut an oval using the largest plain edge oval from the HCD1-7157 Eyelet Ovals & Basics – Large set out of green patterned paper and adhere to the front of the decorative die. Die cut the middle decorative oval from the HCD1-7305 Ornate Ovals Die set out of gold cardstock and adhere to the front of the green patterned paper with heavy cardboard. Stamp the sentiment from the HCPC3884 Candy Cane Cottage Stamp set in Embossing ink and heat emboss with gold embossing powder using a stamp positioner on the small panel from the patterned paper. Die cut the oval using the second largest plain edge die from the HCD1-7157 Eyelet Ovals & Basics – Large set and adhere to the front of the gold decorative oval.
Stamp two of each pine images from the HCPC-3837 Snowy Pine Village Stamp set in Teal Zeal ink on Deluxe Flower Shaping Paper. Colour with Teal Zeal, Vivid Chartreuse and Sepia inks and die cut with the coordinating dies. Add Crystal Clear glitter using Dries Clear glue on a damp sponge and adhere to the top around the oval as shown.
Stamp the snowy pines cardinal image from the HCPC-3918 Snowy Pines Cardinal Cling Stamp Set on Iris cardstock with Black Onyx ink. Colour with Zig Clean Colour Brush Markers and die cut the birds and branches die only. Add snow effects using Dries White glue sprinkled with Crystal Ultrafine glitter. Cut the image in half and adhere the birds on either side of the decorative oval as shown.
Stamp the poinsettia images from the HCPC-3881 Christmas Poinsettia & Holly Stamp set in Vermillion ink on Deluxe Flower Shaping paper. Colour the centres with Vermillion ink and die cut with the coordinating dies. Assemble with two of the same size and add Frosting Powder using Dries Clear glue on a damp sponge. Add Heart of Gold Prills to the centres of the flowers and adhere around the birds and over the pine branches.
Stamp the holly leaves using Library Green ink on Deluxe Flower Shaping Paper. Colour the leaves with Vivid Chartreuse ink and die cut with the coordinating dies. Add Crystal Clear glitter with Dries Clear glue on a damp sponge. Adhere around the poinsettias as shown.
Add snow effects on the poinsettias, pine cones, pine leaves and on the image in the oval ANC804 Prills – Heart of Gold with Dries White glue and Crystal Ultrafine glitter. Add Ultrafine glitter to the bird cage on the oval panel with Dries Clear glue.
For a sneak peak of the new Festive Winterscapes collection please visit the Heartfelt Creations blog here.
Welcome back and today I have a Christmas card to share with you to get inspired to get started early on Christmas cards. I have used the gorgeous Candlelit Christmas collection for this card.
Due to shipping delays the new Tender Moments collection has been postponed and you can benefit by saving 15% on flower shaping bundles including the Christmas Poinsettia bundle.
Welcome back to a special tutorial for Heartfelt Creations featuring the fabulous Classic Rose stamp, die and mold die set.
Making roses is so easy with the coordinating 3D flower shaping molds. The molds allow for consistent shaping and this tutorial will show you the step by step instructions to create different size roses to decorate your cards.
Directions:
Step 1:
Stamp the flowers with Magenta Hue ink on Deluxe Flower Shaping Paper. Colour the flowers in the centres with Tiger Lily ink and the petals with Magenta Hue ink and die cut with the coordinating die.
Colour the edges of the petals with Cactus Flower ink and the backs of the smaller petals with Magenta Hue ink.
Stamp the leaves with Library Green ink on Deluxe Flower Shaping Paper. Colour with Vivid Chartreuse and Magenta Hue inks and die cut with the coordinating die.
Step 2:
Place the petals and the leaves in the coordinating mold. Spritz lightly on the back with some water and then run through your die cutting machine.
Step 3
To create the bud take the smallest petal and add Dries Clear glue to two opposing petals and join together. When dry add the other three petals. This can be used as a small bud as well as for the centre of the larger flowers.
Step 4
Shape the next size up petal with the stamped image on the outside and then add the small bud to the centre with Dries Clear glue. This also makes a good bud to go with the bigger flowers and also rose centres.
Step 5
For the largest flower use three largest petals, one of each of the next sizes. Assemble the three largest petals offsetting the petals each time. Use two foam mats to get a deeper impression when assembling the flower. Take the largest size of the smallest stamp set and shape into a bowl with the stamped side on the outside. Add your previously made bud and add to the centre of this petal with Dries Clear glue. Add this to the centre of the larger petals.
Step 6
For the second largest size flower use three of the smaller petals from the larger stamp set and one each of the other sizes. Assemble the two layer bud as before. Assemble the three larger petals offsetting each time as with the larger flower. Add the largest petal from the smaller stamp set and adhere to the centre of the flower with the stamped side up. Add the bud to the centre of the flower as shown.
Step 7
For the third sized flower take two of the largest size petals from the smaller stamp set and one each of the other sizes from the same stamp set. Make a double petal bud as per previous instructions. Assemble the two larger petals offsetting the petals and making a deep bowl. Add the bud to the centre of the flower.
Step 8
For the smallest flower make a single petal bud. Take two of the middle sized petals from the smaller stamp set and assemble together offsetting the petals and creating a bowl shape. Add the bud with Dries Clear glue and leave to dry.
Step 9
To finish the flowers add Crystal Clear glitter using Dries Clear glue on a damp Hydra sponge.
Heartfelt Creations supplies:
HCPC-3752 Classic Rose Stamp
HCD1-7110 Classic Rose Die
HCFB1-462 3D Rose Shaping Mold
RACP614 Magenta Hue ink
RACP531 Vivid Chartreuse ink
RACP475 Library Green ink
HCPP1-475 Deluxe Flower Shaping Paper (50)
HCST1-401 Deluxe Flower Shaping Kit
PGM15015 Crystal Clear glitter
159723 Dries Clear Glue
352854 Metal Tip for Adhesive Bottles
35854 Hydra Sponge
HCDA2-450 Stack and Store Daubers
Other Supplies:
White cardstock
Tips
Allow the flowers to dry after removing from the mold.
Allow the flowers to fully dry after assembling them before adding glitter.
I hope I have inspired you to create some gorgeous roses for your own projects.
Cut a piece of white cardstock 10” x 7”, score at 5” along the long side and fold to create a base card of 5” x 7”. Cut a piece of patterned paper 5” x 7” and adhere to the card front. Die cut two outer frames using the dies from the HCD1-7191 Intricate Swirls Frames Die set out of Wisteria card. Adhere one frame to the card front and add Crystal Clear glitter to the other frame with Dries Clear glue on a damp sponge. Adhere to the other frame with foam tape. Add Crystal Clear glitter to the inner decorative die and then adhere to the centre of the frame.
Stamp the leaf images from the HCPC-3897 Calla Lily Stamp Set in Library Green ink on Deluxe Flower Shaping Paper. Colour with Leaf Green ink and die cut with the coordinating die and sponge the edges with Library Green ink. Shape using the coordinating mold, add Crystal Clear glitter using Dries Clear glue on a damp sponge and adhere to the right front of the card.
Stamp the calla lily images from the HCPC-3897 Calla Lily Stamp Set in Leaf Green and Lavender inks on Deluxe Flower Shaping Paper. Colour the tips and ends of the green flowers with Leaf Green ink and the base with Sunflower ink and die cut with the coordinating die. Colour the purple flowers with Lavender and Leaf Green inks and die cut with the coordinating dies. Shape using the coordinating mold and add green stamens. Trim the wire ends and adhere among the leaves.
Stamp the sentiment from the HCPC-3848 Cheerful Note Sentiment Stamp set in Library ink on the patterned paper and die cut out using the 2nd smallest die from the HCD1-7204 Arrows and Banner Die set. Mat with Wisteria cardstock and shape a little and add to the card as shown.
Here is a sneak peak of the new Country Cottage collection being released.
Today for Inspirational Wednesday at Heartfelt Creations I have got a gift box and a lovely card featuring flowers made using the new shaping molds.
HC1-7163 Gift of Love Box
HCDP1 Heartfelt Love Paper Collection
HCFS1-465 Art Foam Paper
HCD1-7110 Classic Rose Die
HCPC-3752 Classic Rose Cling Stamp set
HCPC-3644 Birds and Blooms Stamp set
HCD1-756 Birds and Blooms Die
HCPC-3545 Open Leaf stamp
HCD1-736 Classic Leaf die
HCPP3-452 White Cardstock
TSMP900 Memento Tuxedo Black
TSMP707 Memento Bamboo Leaves ink
TSSZ31 Stazon Olive Green ink
HCDA2-45 Stack and Store Daubers
159723 Art Glitter Dries Clear
HCST1-401 Deluxe Shaping Kit
HCS1-459-4 Rock Candy Stamens – small
HCS1-460 Stamens Bridal Bouquet
315951 Carmine Red 3D Metallic Stamp Paint
284117 Silver-Gold 3D Metallic Stamp Paint
Other Centura Pearl White cardstock, Pearls, Stazon Cherry Pink ink
Die cut 4 of the panels out of the Centura Pearl cardstock and assemble. Cut 4 plain square panels from the small heart patterned paper and adhere on all sides of the box. Cut 4 panels for the top of the box out of the small heart patterned paper and adhere to the top of the box. Cut 4 decorative panels from the darker paper and adhere to the sides. To finish decorate with pearls as shown.
To make the leaves stamp the images from the HCPC-3545 Open Leaf stamp set with Tuxedo Black on white cardstock. Colour in the leaves with Bamboo Leaves ink and die cut with the coordinating die, shape and adhere to the top and over the box as shown.
To make the flowers stamp the images from the HCPC-3752 Classic Rose Cling Stamp set in Cherry Pink ink on art foam paper and die cut with the coordinating die. Colour the edges with the Carmine Red stamp paint with a damp sponge. Heat and shape with a heat gun. Use two large petals and the next size petal and assemble with a glue gun. Add the stamens in the centre and adhere to the top of the box over the leaves.
To make the smaller flowers stamp the images from the HCPC-3644 Birds and Blooms Stamp set with the Olive Green ink on foam paper and die cut with the coordinating die. Lightly colour the flowers with the Gold/Silver stamp paint with a damp sponge. Heat and shape with a heat gun. Pierce the centre of the flowers with the piercing tip from the Deluxe Flower Shaping kit and insert the pearl stamen. Adhere to the box as shown.
HCDP1 Heartfelt Love Paper Collection
HCPC-3608 Arianna Blooms Stamp set
HCD1-748 Arianna Blooms Die
HCPC-3545 Open Leaf stamp set
HCD1-736 Classic Leaf die
HCD1-7150 Window Box Elements Die
HCD1-7161 Sweetheart Borders Die
TSBL32 Brilliance Pearlescent Coral
TSMP103 Memento Canteloupe ink
TSMP900 Memento Tuxedo Black ink
TSMP707 Memento Bamboo Leaves ink
TSMP704 Memento New Sprout ink
HCFB1-464 3D Floral Basics Shaping Mold
HCPP3-452 White Cardstock
HCDA2-45 Stack and Store Daubers
159723 Art Glitter Dries Clear
HCST1-401 Deluxe Shaping Kit
ANC818 Prills – Go Man Go
Other – Spellbinders Decorated Birthday die, Glue Gloss
Die cut the base from white cardstock using the Spellbinders Decorated Birthday die and assemble into a centre step card. Cut strips from the striped patterned paper in 7/8th strips and adhere to the sides of the step card and trim to fit. Cut a trim of 1 2/8ths x 1” and adhere to the sides of the front step.
Cut the sentiment panel from the patterned paper and die cut two lace trims from the HCD1-7161 Sweetheart Borders Die from white cardstock and adhere to the sides of the panel. Trim the lace edge to fit the panel. Die cut the frame from the HCD1-7150 Window Box Elements Die in white cardstock and adhere to the top of the panel. Cut a piece of white cardstock 5 ¾” x 3 7/8th and adhere to the back of the panel. Adhere this panel to the centre front of the step card.
To make the leaves stamp the images from the HCPC-3545 Open Leaf stamp set in Bamboo Leaves on white cardstock. Colour the images with New Sprout ink and die cut with the coordinating dies. Shape using the Deluxe Flower Shaping kit and adhere to the front of the card as shown.
To make the flowers stamp the images from the HCPC-3608 Arianna Blooms Stamp set in Pearlescent Coral ink on white cardstock. Ink the centres with Canteloupe ink and die cut with the coordinating die. Shape the flowers using the new HCFB1-464 3D Floral Basics Shaping Mold. Finish shaping into a cup shape with the shaping tools and allow to dry. Using Glue Gloss add Frosting Powder to the flower petals and heat using the heat gun for a frosted finish. Add the prills to the centres of the flowers with Dries Clear glue. Adhere the flowers to the card as shown.
Kiaora and Welcome Back to Part Two of Black Friday
I am really loving these new molds – particularly for the little poinsettias. They can be very fiddly at the least and these molds are such a time saver.
Materials Used:
HCDP1-280 Festive Holly Paper Collection
HCDP1-281 Winter’s Eve Paper Collection
HCPC-3680Sparkling Poinsettia stamp
HCD1-766 Sparkling Poinsettia die
HCPC-3679 Large Sparkling Poinsettia Stamp set
HCD1-765Large Sparkling Poinsettia Die
HCD1-7107 Frolicking Frosty & Spruce die
HCPC-3749 Snow Kissed Spruce Stamp set
HCPC-3771 Wildwood Cottage Stamp set
HCD1-7127 Wildwood Cottage die
HCPC-3794 Window Frame Stamp set
HCD1-7148 Window Frame Die
HCPC-3795 Window Box Fillers Stamp
HCD1-7149 Window Box Fillers Die
HCPC-3791 Festive Holly & Cardinals Stamp set
HCD1-7145 Festive Holly & Cardinals Die
HCPC-3822 Poinsettia & Holly Clusters Stamp
HCD1-7176 Poinsettia & Holly Clusters Die
HCFB1-463 3D Poinsettia Shaping Mold
TSMP709 Memento Northern Pine
TSMP900 Memento Tuxedo Black
TSMP707 Memento Bamboo Leaves
TSMP300 Memento Ladybug
TSMP802 Memento Peanut Brittle
TSMP804 Memento Toffee Crunch
71026 Colorbox Lime Pastel
TSS263 Stazon Teal
TSS222 Stazon Black Cherry
284095 3D Stamp Paint Grass Green
315944 3D Stamp Paint Light Blue
315951 3D Stamp Paint – Carmine
PGM15016 Rajni Chawla’s Frosting Powder
PGM15015 Rajni Chawla’s Crystal Clear
HCS1-457-2 Pastel Pearl Stamens – Medium
HCS803 Minnie Pearl Prills
HCDA2-450 Store and Stack daubers
HCPP2-451 White cardstock
H-401CST1 Deluxe Flower Shaping Kit
159723 Art Glitter Dries Clear adhesive
159951 Art Glitter Dries White adhesive
NU667 Red Berry Nuvo Drops
241159 Dove Blender Pen
HCPP3-452 White Cardstock
HCFS1-465 Art Foam Paper
Other – Spellbinders Victorian Numbers, Cotton Wool, Imagine If Sleeps to Santa Shelf, Prismacolour pencils – 1019, 943, 1085, 1079, 103, 1086, 016, 1003, 109, 912, 122, 1052, 1065, 1060, Voodoo Molly Vintage Paint – Classic White, Americana Decoupage adhesive, Heat Gun, Stazon Forest Green
Instructions:
Paint both the bottom and the top of the shelf with the Voodoo Molly Vintage paint and allow to dry. Trace around the edge of the back of the shelf and the top on the snow and deer scene paper from the Winter’s Eve collection. Trim and adhere to the front of the pieces and sand to get a smooth edge. Assemble the shelf according to the instructions using Dries Clear glue. Using the green stamp paint paint the leaves of the top and the holly berries with the carmine stamp paint on the top of the shelf.
Using the Dries White Glue add snow effects on the trees on the top and bottom of the shelf with a dusting of frosting powder.
Using Glue Gloss add Crystal Clear to the Merry Christmas letters on the top.
To make the poinsettias stamp the images from the HCPC-3680Sparkling Poinsettia stamp in Stazon Teal and Black Cherry inks on the Art Foam paper and die cut with the coordinating die. Sponge the blue edges with the Blue stamp paint and the red edges with Carmine stamp paint. Using a damp sponge dab Dries Clear glue on the petals and sprinkle with Frosting Powder. Heat the petals with a heat gun to frost and shape the poinsettias. Adhere around the top of the back with a hot glue gun as shown.
To make the poinsettia leaves stamp the images from HCPC-3679 Large Sparkling Poinsettia Stamp set in Stazon Forest Green and die cut with the coordinating die. Sponge the edges with green stamp paint. Using a damp sponge dab Dries Clear glue on the petals and sprinkle with Frosting Powder. Heat the petals with a heat gun to frost and shape the leaves. Adhere the leaves around the flowers as shown with a hot glue gun.
To make the trees stamp one large and two medium tree images from the HCPC-3749 Snow Kissed Spruce Stamp set with Northern Pine ink on white cardstock and die cut using the coordinating die. Add snow effects with Dries White Glue and Frosting Powder and heat with a heat gun for a frosted look. Bend the trunks at the base of the trees over to create a tab and glue the trunk to the base of the shelf.
Cut one of the deer from the remaining paper and leave a ½’ tab at the bottom of the deer. Fold the tab and adhere on the shelf with Dries White Glue.
To make the lamp stamp the image from the HCPC-3791 Festive Holly & Cardinals Stamp set in Tuxedo Black ink on white cardstock. Colour in with pencils 0106, 1003, 109, 912, 122, 1052, 1065, 10760 and die cut with the coordinating die. Add snow on the lamp with Dries Clear glue and Frosting Powder. Heat to create a frosted look. Add Crystal Clear to the inside of the lamp. Adhere behind the trees at the back as shown.
To make the house die cut the house using the board effect pink paper from the Winter’s Eve Collection. Die cut the roof from a piece of brown patterned paper and adhere to the top of the house. Die cut another roof top piece from white cardstock and adhere at the back of the house for extra strength. Using Dries White glue and frosting powder add snow effects o the top of the roof. Stamp the door, two large window and one small window from the HCPC-3771 Wildwood Cottage Stamp set in Tuxedo Black ink on white cardstock. Sponge the shutters and wood trim with Toffee Crunch and then colour in with pencils 1019, 943, 1085, 1079, 103, 1086 and die cut with coordinating dies. Adhere to the front of the house as shown. Add snow and glitter to the windows and door using Dries White glue and Frosting Powder. Cut a piece of white cardstock 2” x 3 ½”, score ¾” in from each end of the long side and adhere to back of the house. Adhere this white cardstock to the fence at the side and the back of the shelf to anchor the house in place.
Stamp the snow laden branch image from the HCPC-3795 Window Box Fillers Stamp Set in Tuxedo Black ink on white cardstock. Colour the branches in Toffee Crunch with a Dove Blender pen and die cut with the coordinating die. Add snow with Dries White glue and Frosting Powder. Adhere to the side of the house.
Stamp the toboggan from the HCPC-3794 Window Frame Stamp set in Tuxedo Black ink on white cardstock. Sponge lightly with Toffee Crunch ink and then colour in with pencils 1010and die cut. Add snow effects to the toboggan with Dries White Glue and Frosting Powder. Adhere the toboggan to the front of the house as shown.
Stamp the holly and cardinal images from the HCPC-3791 Festive Holly & Cardinals Stamp set in Tuxedo Black on white cardstock. Sponge the holly leaves with Bamboo Leaves, the cardinals with Ladybug and Peanut Brittle inks, and using the Dove Blender pen colour the stems with Toffee Crunch ink and the holly fruit with Ladybug ink and die cut with the coordinating dies. Add the Red Berry Nuvo drops to the holly and allow to dry before shaping lightly and adhering to the front and sides of the fence. For the holly images that hang above the fence die cut extra dies in white cardstock and adhere to the images for extra strength.
To make the holly leaves stamp the images from the HCPC-3822 Poinsettia & Holly Clusters Stamp set in Bamboo Leaves on white cardstock. Colour in with Lime Pastel ink and die cut with the coordinating die. Shape the holly using the HCFB1-463 3D Poinsettia Shaping Mold, allow to dry and then shape and assemble with the poinsettias. To make the poinsettias stamp the images from the HCPC-3822 Poinsettia & Holly Clusters Stamp set in Ladybug and Teal Zeal inks. Sponge the poinsettias lightly with Ladybug and Teal Zeal inks and die cut with the coordinating die. Shape using the HCFB1-463 3D Poinsettia Shaping Mold and allow to dry before shaping and assembling. Add Frosting Powder using Dries Clear glue on a damp sponge and heat to get the frosted look. Adhere to the front of the fence over the holly as shown.
To make the snow break up cotton wool and dab some dries clear over it and sprinkle with Crystal Clear and adhere to the bottom of the shelf around the deer, trees and house.
To make the tags cut the images from both the Winter’s Eve and Festive Holly paper collections to fit the tags that have been supplied in the kit. Sand the edges and the slots to finish the tags. Die cut the numbers using the Victorian Numbers set out of white cardstock and adhere to the tags. Hang two tags on the hooks that have been glued to the top half of the shelf. Stack the rest of the tags behind the house.
I had a lot of fun making this project and it was definitely helped by using the molds. Stay tuned for part three of Black Friday specials.
Today sees the launch of the fabulous new products from Heartfelt Creations for Black Friday – flower shaping molds that will transform your flower shaping and a gorgeous new journal with inspirational pages that will inspire you to create and journal at the same time. Today I will be doing two different posts today as I have got two projects on the Heartfelt Creations blog featuring the new flower shaping molds. Please check out the other amazing projects from the Design Team here: https://www.heartfeltcreations.us/blog/644/black-friday-savings-inspiration
I am so excited about the new flower shaping molds that have transformed my flower making and saved my arthritic hands. They are just so revolutionary and I can do a lot of flowers in a short space of time and my hands are so thankful for them.
First up is a card made with Arianna Blooms. These are just amazing done in the Basic Flower Shaping Mold.
Materials Used:
HCDP1-250 Birds and Blooms Paper Collection
HCPC-3608 Arianna Blooms Stamp set
HCD1-748 Arianna Blooms Die
HCPC-3644 Birds and Blooms Stamp set
HCD1-756 Birds and Blooms Die
HCD1-7161 Sweetheart Borders Die
HCPC-3545 Open Leaf stamp set
HCD1-736 Classic Leaf die
HCPC-3815 Words of Wisdom
159723 Art Glitter Dries Clear
HCST1-401 Deluxe Shaping Kit
TSMP707 Memento Bamboo Leaves ink
TSMP904 Memento Summer Sky ink
TSBL32 Brilliance Pearlescent Coral
TSMP103 Memento Canteloupe ink
TSMP900 Memento Tuxedo Black ink
HCBC1-456 Shadow Box – White
HCD2-751 Cut Mat Create 2A
HCFB1-464 3D Floral Basics Shaping Mold
HCPP3-452 White Cardstock
HCDA2-45 Stack and Store Daubers
HCS1-459-2 Bright Pearl Medium Stamens
PGN15015 Rajni Chawla’s Crystal Clear
PGM15016 Rajni Chawla’s Frosting Powder
Other – Crafter’s Companion A3 Construction Cardstock, Glue Gloss, Die Cutting Machine, Stamp Press
Instructions:
To make the base card cut the base card at 14” x 8 ¾” score at 7” to make a base card of 7” x 8 ¾”. Cut a piece of patterened paper from the Birds and Blooms paper collection 7” x 8 ¾” and adhere to the front of the card.
Cut a 6’ x 6” panel of patterned paper. To make the shadow box assemble and cut a piece of patterned paper and adhere to the back of the shadow box. Cut a 6” x 6” panel with the flowers on the top left corner. Die cut the square from the patterned paper using the die from the HCD2-751 Cut Mat Create 2A die set. Using a stamp press stamp the image from the HCPC-3815 Words of Wisdom in Tuxedo Black and adhere to the back of the card. Trim the remaining frame to 5” x 5” and adhere to the front of the shadow box. Using the leftover ½” strips decorate the sides of the box. Cut a piece of 6” x 6” panel and adhere the shadow box to this. Cut 4 decorative edges from the HCD1-7161 Sweetheart Borders Die set and adhere to the sides of the panel as shown. Adhere this all to the base card.
To make the leaves stamp the images from the HCPC-3545 Open Leaf stamp set with Tuxedo Black on white cardstock. Sponge the images with Bamboo Leaves ink and die cut with the coordinating dies. Shape using the Deluxe Flower Shaping kit and add Crystal Clear to the leaves with Glue Gloss. Adhere at the bottom right and over the left top corner of the shadow box.
To make the flowers stamp the images from the HCPC-3608 Arianna Blooms Stamp set in Pearlescent Coral ink on white cardstock. Ink the centres with Canteloupe ink and die cut with the coordinating die. Shape the flowers using the new HCFB1-464 3D Floral Basics Shaping Mold. Finish shaping into a cup shape with the shaping tools and allow to dry. Add the yellow stamens to the centres of the flowers by trimming the tops and adding using Dries Clear glue. Using Glue Gloss add Frosting Powder to the flower petals and heat using the heat gun. Adhere to the leaves as shown around the bottom right and the top left corners.
To make the birds stamp the images from the HCPC-3644 Birds and Blooms Stamp set using Tuxedo Black ink on white cardstock and die cut using the coordinating die. Colour with Summer Sky and Canteloupe and shape lightly using the Deluxe Flower Shaping kit. Adhere to the flowers as shown.
I hope that you have a lot of fun creating with these amazing new molds. You won’t regret buying them.