Cherry Blossom Black Friday

Kia Ora Koutou

Welcome back to my third post for the release of special new products from Heartfelt Creations for Black Friday this year.

Products Used:

Designer Dries Clear Adhesive159723
Crystal Ultrafine Transparent Glitter 1/2 oz.85-glitter
Coral See PrillsANC820
6″ x 6″ Swing Fold Card – WhiteHCCB1-482
Eyelet Circle & Basics Small DieHCD1-7154
Circle Basics Large DieHCD1-7155
Tweet Cherry Blossoms DieHCD1-7230
Cherry Blossom Retreat DieHCD1-7231
Wishing Well Oasis DieHCD1-7232
Daydreams Bridge DieHCD1-7233
Purr-fect Posies DieHCD1-7238
Purring and Playful DieHCD1-7240
Elements of Home DieHCD1-7244
Rounded Window Frame DieHCD1-7271
Rounded Sunlight Window DieHCD1-7272
Window Hinges DieHCD1-7285
Cherry Blossom Retreat Paper CollectionHCDP1-2100
Window Scenes Paper CollectionHCDP1-2109

Other Products: 

White Ribbon, Prills – Lavender & Lace, Colorbox ink – Wisteria, Spray adhesive, foam tape

For more tips on creating with the Window Scene cards & dies, watch the tutorial at https://youtu.be/LnM95GR92ao.

For more tips on creating with the Cherry Blossom Retreat collection, watch the tutorial at https://youtu.be/OaA2da5H-E0.

Instructions:

Front

Adhere a piece of white ribbon to the right of the card front.  Die cut a large circle out of the patterned paper using the large circle die from the HCD1-7272 Rounded Sunlight Window Frame Die set and adhere to the front of the card.  Die cut the decorative die from the HCD1-7233 Daydreams Bridge Die set out of white cardstock.  Add Frosting Powder using spray adhesive and adhere to the front of the card.

Stamp the branch images from the HCPC-3867 Cherry Blossoms Retreat Stamp set in Jet Black ink on Iris cardstock.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating dies.  Shape and add Crystal Clear glitter to the images, trim and adhere to the top and left of the card.

Stamp the birdhouse image from the HCPC-3867 Cherry Blossoms Retreat Stamp set in Jet Black ink on Iris cardstock.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die.  Add Crystal Clear glitter to the leaves and flowers with Dries Clear glue on a dry sponge and add to the middle of the decorative die with foam tape.

Stamp the leaf images from the HCPC-3866 Tweet Cherry Blossoms Stamp in Library Green ink on Deluxe Flower Shaping Paper.  Colour with Leaf Green ink and die cut with the coordinating die.  Shape using the 3D Cherry Blossom Shaping Mold and add Crystal Clear glitter with Dries Clear glue on a damp sponge.  Adhere over the branches.

Stamp the flower images from the HCPC-3866 Tweet Cherry Blossoms Stamp in Red Geranium ink on Deluxe Flower Shaping Paper.  Colour with Red Geranium and Pink Peony inks and die cut with the coordinating die.  Shape using the 3D Cherry Blossom Shaping Mold and add Crystal Clear glitter with Dries Clear glue on a damp sponge.  Add Coral Seas Prills before adhering over the leaves, branches and on the birdhouse.

Stamp the bird images from the HCPC-3866 Tweet Cherry Blossoms Stamp in Jet Black ink on Iris cardstock.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die.  Shape using the 3D Cherry Blossom Shaping Mold and add Crystal Clear glitter with Dries Clear glue on a dry sponge.  Adhere over the flowers and leaves and on the birdhouse and chair.

Stamp the pot plant image from the HCPC-3868 Wishing Well Oasis Stamp set in Jet Black ink on Iris cardstock.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die.  Add Crystal Clear glitter using Dries Clear Glue on a dry sponge and adhere over the seat with foam tape.

Stamp the flower images from the HCPC-3874 Purr-fect Posies Stamp set on Deluxe Flower Shaping Paper with Wisteria ink.  Colour with Wisteria ink and die cut with the coordinating die.  Shape using the 3D Purr-fect Posies Shaping Mold and add Crystal Clear glitter using Dries Clear glue on a damp sponge.  Add Lavender & Lace Prills to the centres of the flowers and adhere the flowers at the bottom of the card by the pot plant as shown.

Stamp the leaf images from the HCPC-3874 Purr-fect Posies Stamp set in Library Green ink on Deluxe Flower Shaping Paper.  Colour with Leaf Green ink and die cut with the coordinating die.  Shape Shape using the 3D Purr-fect Posies Shaping Mold and add Crystal Clear glitter using Dries Clear glue on a damp sponge.  Trim and adhere around the flowers.

Inside Left

Die cut the circle out of orange coloured paper from the paper collection using the large circle die from the HCD1-7272 Rounded Sunlight Window Frame Die and adhere to the card.  Die cut the outer decorative die from the HCD1-7271 Rounded Window Frame Die set out of gold cardstock and adhere to the card.  Die cut the eyelet circle out of orange patterned paper using the eyelet circle die from the HCD1-7154 Eyelet Circle & Basics – Small set and adhere to the centre of the gold decorative circle die.  Die cut the circle from the 6” x 6” panel from the Cherry Blossom Retreat Paper Collection using the largest die from the HCD1-7155 Circle Basics – Large Die set and adhere to the eyelet circle.  Add Diamond glitter to the image and Coral Seas Prills to the centres of the flowers as shown.

Stamp the seat image from the HCPC-3868 Wishing Well Oasis Stamp set in Jet Black ink on Iris cardstock.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die.  Adhere to the card as shown.

Stamp the cat image from the HCPC-3876 Purring and Playful Stamp set in Jet Black ink on Iris cardstock.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die.  Adhere to the seat as shown.

Stamp the pot plant image from the HCPC-3868 Wishing Well Oasis Stamp set in Jet Black ink on Iris cardstock.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die.  Add Crystal Clear glitter using Dries Clear Glue on a dry sponge and adhere over the seat.

Stamp the hollyhock and pot image from the HCPC-3880 Elements of Home Stamp set in Jet Black ink on Iris cardstock.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating dies.  Add Crystal Clear glitter using Dries Clear glue on a dry sponge.  Adhere the hollyhock image behind the seat and the pot image in front of the other pot image.

Inside

Using the two semi-circular dies from the HCD1-7274 Rounded Lattice Window Die set die cut two windows out of the card.  Die cut a large circle out of clear cardstock using the large circle die from the HCD1-7272 Rounded Sunlight Window Die set and adhere to the card.  Die cut a large circle out of cherry blossom patterned paper using the large circle die from the HCD1-7272 Rounded Sunlight Window Die out of the paper collection.  Die cut two windows out using the semi-circular dies from the HCD1-7274 Rounded Lattice Window Die set out of the circle and adhere to the card.  Die cut two windows using a combination of the window dies from the HCD1-7272 Rounded Sunlight Window Die out of gold cardstock.  Adhere to the card as shown.

Inside Right

Die cut a large circle out of orange patterned paper using the large circle die from the HCD1-7272 Rounded Sunlight Window Die out of the paper collection.  Die cut two windows out using the semi-circular dies from the HCD1-7274 Rounded Lattice Window Die set out of the circle and adhere to the card.  Die cut two windows using a combination of the window dies from the HCD1-7272 Rounded Sunlight Window Die out of gold cardstock.  Adhere to the card as shown.

Middle Back

Die cut a large circle out of the scenic patterned paper using the large circle die from the HCD1-7272 Rounded Sunlight Window Die out of the paper collection and adhere to the back.

Stamp the branch image from the HCPC-3867 Cherry Blossoms Retreat Stamp set in Jet Black ink on Iris cardstock.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating dies.  Shape and add Crystal Clear glitter to the images, trim and adhere to the top of the card.

Stamp the Thinking of You image from the HCPC-3867 Cherry Blossoms Retreat Stamp set in Jet Black ink on Iris cardstock.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die.  Adhere to the top of the card as shown with foam tape.

Stamp the leaf images from the HCPC-3866 Tweet Cherry Blossoms Stamp in Library Green ink on Deluxe Flower Shaping Paper.  Colour with Leaf Green ink and die cut with the coordinating die.  Shape using the 3D Cherry Blossom Shaping Mold and add Crystal Clear glitter with Dries Clear glue on a damp sponge.  Adhere over the branch.

Stamp the flower images from the HCPC-3866 Tweet Cherry Blossoms Stamp in Red Geranium ink on Deluxe Flower Shaping Paper.  Colour with Red Geranium and Pink Peony inks and die cut with the coordinating die.  Shape using the 3D Cherry Blossom Shaping Mold and add Crystal Clear glitter with Dries Clear glue on a damp sponge.  Add Coral Seas Prills before adhering over the leaf.

Stamp the bird images from the HCPC-3866 Tweet Cherry Blossoms Stamp in Jet Black ink on Iris cardstock.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die.  Shape using the 3D Cherry Blossom Shaping Mold and add Crystal Clear glitter with Dries Clear glue on a dry sponge.  Adhere over the flowers and leaves

Add Diamond glitter to the background image using Dries Clear Glue.

Back

Adhere a white ribbon to the left of the circle.  Die cut a large circle out of orange patterned paper using the large circle die from the HCD1-7272 Rounded Sunlight Window Die out of the paper collection and adhere to the back.  Die cut two keys from the HCD1-7285 Window Hinges Die set out of gold cardstock and tie at the end of the ribbon on the front and back of the card.

I am sure you will have a lot of fun with these amazing new products.

Happy Crafting

Ka Kite Anu

Patricia

Wild Aster Black Friday

Kia Ora Koutou

Welcome to my second post for Black Friday and I have another window card for Heartfelt Creations.  I am so excited to see Heartfelt Creations have released their own gold cardstock which is perfect for the window cards.

Products Used:

Designer Dries Clear Adhesive159723
Zig Clean Color Real Brush Markers – 36 Pack478455
Clear Cardstock 8.5 x 11GBKK811B1
6″ x 6″ Swing Fold Card – WhiteHCCB1-482
Eyelet Circle & Basics Small DieHCD1-7154
Circle Basics Large DieHCD1-7155
Ticket and Tags DieHCD1-7201
Wild Aster DieHCD1-7257
Wild Aster Spray DieHCD1-7258
Wild Aster Scroll & Cluster DieHCD1-7259
Swirly Accent Spray DieHCD1-7263
Rounded Window Frame DieHCD1-7271
Rounded Sunlight Window DieHCD1-7272
Rounded Lattice Window DieHCD1-7274
Window Hinges DieHCD1-7285
Wild Aster Paper CollectionHCDP1-2106
Window Scenes Paper CollectionHCDP1-2109
Luxe Gold CardstockHCGP1-488

Other Products: 

iCraft Iris Cardstock, Prills – Lavender & Lace, Colorbox ink – Wisteria, Nuvo Pure Sheen Glitter – Diamond

Instructions:

Front

Using the two semi-circular dies from the HCD1-7274 Rounded Lattice Window Die set die cut two windows out of the front of the card.  Die cut a large circle out of clear cardstock using the large circle die from the HCD1-7272 Rounded Sunlight Window Die set and adhere to the front of the card.  Die cut a large circle from the HCD1-7272 Rounded Sunlight Window Die set out of green patterned paper out from the paper collection.  Die cut two windows out using the semi-circular dies from the HCD1-7274 Rounded Lattice Window Die set out of the green circle and adhere to the front of the card.  Die cut two windows using a combination of the window dies from the HCD1-7272 Rounded Sunlight Window Die out of gold cardstock.  Adhere to the front of the card as shown. Die cut an outer latch and two inner small latches from the HCD1-7285 Window Hinges Die set out of gold cardstock.  Adhere the inner latches together and adhere to the front of the windows as shown.  Adhere the two outer latches together and add to the inner latch.  Die cut on outer layer and two inner handles from the HCD1-7285 Window Hinges Die set out of gold cardstock.  Adhere the two inner handles together and glue to the outer handle.  Adhere a magnet to the back of the handle and then adhere to the right side of the front as shown.

Stamp the images from the HCPC-3889 Wild Aster Scroll & Cluster Stamp and HCPC-3888 Wild Aster Spray Stamp sets in Jet Black ink on Iris cardstock.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die.  Shape and add Crystal Clear glitter to the images using Dries Clear glue on a dry sponge.  Adhere to the bottom front of the card.  Add Go Man Go Prills to the centres of the flowers and Lavender & Lace Prills to the aster spray with Dries Clear glue.

Stamp the flower images from HCPC-3887 Wild Aster Stamp set using Majestic Violet ink on Deluxe Flower Shaping Paper.  Colour with Cactus Flower ink and die cut with the corresponding die.  Colour the edges with Vibrant Fuchsia and shape using the Deluxe Flower Shaping Kit.  Assemble and add Crystal Clear glitter to the flowers and Go Man Go Prills to the centres of the flowers.  Adhere to the base of the card front.

Die cut a tag from the Wild Aster Paper Collection using the small tag die from the HCD1-7201 Ticket & Tags Die and adhere among the flowers as shown.

Left inside window.

Die cut a large circle out of dark pink patterned paper using the large circle die from the  f HCD1-7272 Rounded Sunlight Window Die out of the paper collection.  Die cut two windows out using the semi-circular dies from the HCD1-7274 Rounded Lattice Window Die set out of the green circle and adhere to the card.  Die cut two windows using a combination of the window dies from the HCD1-7272 Rounded Sunlight Window Die out of gold cardstock.  Adhere to the card as shown.

Right side

Adhere a magnet to the right side to match the magnet on the front.  Cut a 6” x 6” piece of dark pink patterned paper from the paper collection and adhere to the card.  Cut a circle out of the blossom patterned paper using the large circle die from the HCD1-7272 Rounded Sunlight Window Die set and adhere to the front of the card.  Die cut the corner dies from the HCD1-7263 Swirly Accent Spray Die set out of gold cardstock and adhere to the corners.

Add Diamond glitter to the image using Dries Clear glue.

Left Back

Cut a 6” x 6” panel featuring purple asters and adhere to the left back. Die cut an outer decorative die from the HCD1-7271 Rounded Window Frame Die set out of white cardstock, sponge the edges with Wisteria ink and add Crystal Clear glitter using Dries Clear glue on a damp sponge and add to the card.  Die cut the eyelet circle using the eyelet edge die from the HCD1-7154 Eyelet Circle & Basics – Small set die out of white cardstock.  Adhere to the decorative circle.  Die cut a plain circle out of patterned paper from the Wild Aster Paper Collection using the largest plain edge die from the HCD1-7155 Circle Basics – Large Die set, sponge the edges with Wisteria ink and adhere to the eyelet circle.  Die cut the inner decorative circle from the HCD1-7271 Rounded Window Frame Die using the outer decorative and inner lattice die.  Die cut another lattice circle using the third largest die from the HCD1-7154 Eyelet Circle & Basics – Small set and the lattice die from the HCD1-7271 Rounded Window Frame Die set.  Sponge with Wisteria ink and add Frosting Powder using spray adhesive.  Adhere to the front of the inner decorative die and then add to the middle of the large decorative die.

Stamp the scroll image from the HCPC-3889 Wild Aster Scroll & Cluster Stamp set in Jet Black ink on Iris cardstock.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die.  Add Crystal Clear glitter to the flowers using Dries Clear glue on a dry sponge and then adhere to the front of the lattice.

Right Back

Cut a 6” x 6” panel featuring purple asters and adhere to the left back. Die cut an outer decorative die from the HCD1-7271 Rounded Window Frame Die set out of white cardstock, sponge the edges with Wisteria ink and add Crystal Clear glitter using Dries Clear glue on a damp sponge and add to the card.  Die cut the eyelet circle using the eyelet edge die from the HCD1-7154 Eyelet Circle & Basics – Small set die out of white cardstock.  Adhere to the decorative circle.  Die cut a plain circle out of patterned paper from the Wild Aster Paper Collection using the largest plain edge die from the HCD1-7155 Circle Basics – Large Die set, sponge the edges with Wisteria ink and adhere to the eyelet circle.

Stamp the large aster spray and the small aster spray images from the HCPC-3888 Wild Aster Spray Stamp set in Jet Black ink on Iris cardstock.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die.  Shape and add Crystal Clear using Dries Clear glue on a dry sponge.  Adhere to the decorative die as shown.  Add Go Man Go Prills to the flower centres and Lavender & Lace Prills to the small aster spray.

Happy Crafting

Ka Kite Anu

Patricia

Sweet Peony Black Friday

Kia Ora Koutou

Welcome to a very special post featuring the new Black Friday release from Heartfelt Creations.  There are some amazing new dies and shaped cards to take your cardmaking to the next level.

 

Products Used:

Designer Dries Clear Adhesive159723
Groove Golf Tool SetDMCT4185
6″ x 6″ Round Bi-Fold Card – WhiteHCCB1-481
Wildwood Florals DieHCD1-7125
Eyelet Circle & Basics Small DieHCD1-7154
Circle Basics Large DieHCD1-7155
Small Sweet Peony DieHCD1-7173
Large Sweet Peony DieHCD1-7174
Ticket and Tags DieHCD1-7201
Rounded Window Frame DieHCD1-7271
Rounded Sunlight Window DieHCD1-7272
Rounded Eyelet Window DieHCD1-7273
Window Hinges DieHCD1-7285
Window Scenes Paper CollectionHCDP1-2109
Sweet Peony Paper CollectionHCDP1-288
3D Floral Basics Shaping MoldHCFB1-464
Wildwood Florals Cling Stamp SetHCPC-3769
Small Sweet Peony Cling Stamp SetHCPC-3819

Other Products: 

Glue Gun, Magnets, Pearls, Brilliance Pearlescent ink – Lavender

For more tips on creating with the Window Scene cards & dies, watch the tutorial at https://youtu.be/LnM95GR92ao.

To see how to shape the peony, watch the video at https://youtu.be/L9_MLkvpGPQ.

Instructions:

Front side panels

Adhere a small magnet to the right front panel.  Die cut two pink patterned papers out of the paper collection using the semi-circle dies from the HCD1-7273 Rounded Eyelet Window Die set.  Die cut two of the decorative dies from the HCD1-7273 Rounded Eyelet Window die set out of white cardstock.  Sponge the edges with Vibrant Fuchsia inks and add Frosting powder to the dies using spray adhesive.  Adhere the pink semi-circle die cuts to the decorative dies and then adhere to the side flaps.

Die two outer latch and two inner latches from the HCD1-7285 Window Hinges Die out of white cardstock.  Sponge all the edges using Vibrant Fuchsia ink and adhere the two inner latch dies together and then add to one of the outer latches.  Add a magnet on the back on the latch on one side and then adhere the second outer latch to cover the magnet.  Adhere the latch to the left flap.

Stamp the peonie images from the HCPC-3819 Small Sweet Peony Stamp and HCPC-3820 Large Sweet Peony Stamp sets in Rose Madder ink on Deluxe Flower Shaping Paper.  Colour the centres of the flowers with Sunflower ink and the rest of the flowers with Rose Madder and Tea Rose inks and die cut with the coordinating dies.  Colour the back of the flowers with Rose Madder ink and then shape using the 3D Floral Basics Flower Shaping Mold.  Finish shaping with the groove golf tools.  When dry pierce the centres of the flowers and add yellow bead stamens and assemble with a glue gun.  Add Crystal Clear glitter with Dries Clear glue on a damp sponge. Adhere to the front of the side flaps as shown.

Stamp the leaves from the HCPC-3819 Small Sweet Peony Stamp and HCPC-3820 Large Sweet Peony Stamp sets in Library Green ink on Deluxe Flower Shaping Paper.  Colour with Leaf Green ink and die cut with the coordinating die.  Colour the backs of the leaves with Leaf Green ink and shape using the groove golf tools.  Add Crystal Clear glitter using Dries Clear glue on a damp sponge and then adhere around the peonies as shown.

Stamp the flower images from HCPC-3769 Wildwood Florals Stamp set in Lavender ink on Deluxe Flower Shaping paper.  Colour the images in Lavender ink and die cut with the coordinating die.  Shape using the Deluxe Flower Shaping kit and when dry pierce a hole in the centres and add a white pastel stamen to the centres.  Add Crystal Clear glitter to the flowers, trim the wires and adhere around the peonies and leaves.

Add pearls to the decorative die as shown.

Inside Flaps

Die cut a large circle using the plain edge die from the HCD1-7271 Rounded Window Die and cut down the centre of the circle.  Sponge the edges with Vibrant Fuchsia ink and adhere to the inside flaps.

Inside Back

Cut a 6” x 6” panel from the paper collection and trim the sides slightly to fit into the back.  Sponge the edges and adhere to the back.

Die cut the outer decorative edge from the HCD1-7271 Rounded Window Frame Die out of white cardstock.  Sponge the edge with Vibrant Fuchsia ink and add Frosting Powder with Dries Clear glitter on a damp sponge.  Adhere to the back of the card.  Die cut the eyelet circle from the … out of white cardstock, sponge the edge with Vibrant Fuchsia ink and add Frosting Powder using Dries Clear glitter on a damp sponge.  Adhere to the middle of the decorative circle.  Die cut the patterned paper from the Sweet Peony Paper Collection using the largest plain edge die from the HCD1-7155 Circle Basics – Large Die set Sponge the edge with Vibrant Fuchsia ink and adhere to the eyelet circle.  Die cut the inner decorative circle from the HCD1-7271 Rounded Window Frame Die using the outer decorative and inner lattice die.  Die cut another outer decorative circle using the third largest die from the HCD1-7154 Eyelet Circle & Basics – Small die set and the inner decorative die from the HCD1-7271 Rounded Window Frame Die set, sponge with Vibrant Fuchsia ink and add Frosting Powder using spray adhesive.  Adhere to the front of the inner decorative die and then add to the middle of the large decorative die.

Die cut the tag from the Sweet Peony Paper Collection using the tag die from the HCD1-7201 Ticket & Tags Die set and adhere to the middle of the lattice as shown.

I am sure that you will have so much fun with these new products.

Happy Crafting

Ka Kite Anu

Patricia

 

‘Tis the Season for Giving

Kia Ora Koutou

Welcome back and today I have another blog post for Dress My Craft.  Christmas is just around the corner and I have another Christmas card featuring the beautiful Christmas Bells paper collection and motif sheets.

I have made a video on how I have made this card here: https://youtu.be/3fUMZpmhWYA

Happy Crafting

Ka Kite Anu

Patricia

 

Wilderness Retreat Happy Birthday

Kia Ora Koutou

Welcome back and today I am sharing a birthday card that is perfect for the man in your life for Inspiration Wednesday at Heartfelt Creations.  I am loving the Create a’scape stamps and dies to create fabulous scenes.

Products Used:

Designer Dries Clear Adhesive159723
Metal Tip for Adhesive Bottles352854
Zig Clean Color Real Brush Markers – 36 Pack478455
Ticket and Tags DieHCD1-7201
Create a ‘scape Backcountry DieHCD1-7267
Create a ‘scape Wilderness DieHCD1-7268
Create a ‘scape Trout Lake DieHCD1-7269
Create a ‘scape Nature DieHCD1-7270
Intricate Swirl Frames DieHCD2-7191
Wilderness Retreat Paper CollectionHCDP1-2108
Special Birthday Sentiments Cling Stamp SetHCPC-3843
Create a ‘scape Backcountry Cling Stamp SetHCPC-3893
Create a ‘scape Wilderness Cling Stamp SetHCPC-3894
Create a ‘scape Trout Lake Cling Stamp SetHCPC-3895
Create a ‘scape Nature Cling Stamp SetHCPC-3896
Rajni Chawla’s Frosting PowderPGM15016
Ranger Archival Ink Pad – Jet BlackRACP468
Ranger Archival Ink Pad – Library GreenRACP475

Other Products: 

Foam tape, spray adhesive, blue pearlized cardstock, Nuvo Pure Sheen Glitter – Diamond, White Cardstock

For more tips on creating with the Wilderness Retreat Collection watch the tutorial at https://youtu.be/wJ3oZUANnE8.

Instructions:

Cut a piece of white cardstock 10” x 7”, score at 5” along the long side and fold to create a base card of 5” x 7”.  Cut a piece of patterned paper and adhere to the card front.  Die cut a base frame from the HCD1-7191 Intricate Swirls Frames Die out of the blue card and adhere to the front of the card.

Cut a 6” x 4” panel from the paper collection.  Stamp the mountain image from the HCPC-3893 Create a’scape Backcountry Stamp set in Jet Black ink on the watercolour card. Colour in with Zig Clean Colour Brush Markers in blue/grey tones and adhere to the panel.  Stamp two barn images from the HCPC-3894 Create a’scape Wilderness Stamp set in Jet Black ink on watercolour card.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die – one complete image and one barn and tree image only.  Adhere the barn and tree image to the front of the complete image and then layer the image over the mountains as shown on the panel.  Trim the edges and then adhere the panel to the card front.

Cut the outer frame from the HCD1-7191 Intricate Swirls Frames Die set out of the blue card and add Frosting Powder with spray adhesive and add to the front of the card with foam tape.

Stamp the hollyhock images from the HCPC-3896 Create a’scape Nature Stamp set in Jet Black ink on watercolour card.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die.  Trim and adhere to the bottom right under the frame and to the bottom left using foam tape and Dries Clear glue.

Stamp the deer images from the HCPC-3894 Create a’scape Wilderness Stamp set in Jet Black ink on watercolour card.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die.  Adhere to the right of the card using foam tape and Dries Clear glue.

Stamp the rock and grass image from the HCPC-3895 Create a’scape Trout Lake Stamp set in Jet Black ink on watercolour card.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die.  Adhere to the bottom of the card.

Stamp the fox, rabbit and squirrel image from the HCPC-3896 Create a’scape Nature Stamp set in Jet Black ink on watercolour card.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die.  Adhere the fox to the bottom left behind the hollyhocks, the squirrel to the bottom middle and the rabbit to the bottom left.

Die cut the ticket from the paper collection using the ticket die from the HCD1-7201 Ticket & Tags Die set.  Cut a piece of blue card and mat the ticket and then adhere the sentiment to the top of the card using foam tape.

To finish, add Diamond glitter to the images and on the flourishes on the paper with Dries Clear glue.

Happy Crafting

Ka Kite Anu

Patricia

Wilderness Retreat Happy Father’s Day

Kia Ora Koutou

Welcome and today I am very excited to share my card for the release of the amazing Wilderness Retreat collection from Heartfelt Creations.  This collection is perfect for masculine cards and great for those who enjoy colouring and layering stamps.

Products Used:

Designer Dries Clear Adhesive159723
Zig Clean Color Real Brush Markers – 36 Pack478455
Frolicking Frosty and Spruce DieHCD1-7107
Arrows and Banner DieHCD1-7204
Create a ‘scape Backcountry DieHCD1-7267
Create a ‘scape Trout Lake DieHCD1-7269
Create a ‘scape Nature DieHCD1-7270
Wilderness Retreat Paper CollectionHCDP1-2108
Snow Kissed Spruce Cling Stamp SetHCPC-3749
Create a ‘scape Backcountry Cling Stamp SetHCPC-3893
Create a ‘scape Trout Lake Cling Stamp SetHCPC-3895
Create a ‘scape Nature Cling Stamp SetHCPC-3896
Ranger Archival Ink Pad – Jet BlackRACP468
Ranger Archival Ink Pad – Library GreenRACP475

Other Products: 

Reeves watercolour card 300gsm, foam tape, Nuvo Pure Sheen Glitter – Diamond

For more tips on creating with the Wilderness Retreat Collection watch the tutorial at https://youtu.be/wJ3oZUANnE8.

Instructions:

Cut a piece of white cardstock 12” x 6”, score at 6” along the long side and fold to create a base card of 6” x 6”.  Cut a 6” x 6” panel from the paper collection and die cut the oval using the largest plain edge die from the HCD1-7157 Eyelet & Ovals Basic – Large Die set from the paper.  Using the outer frame as template adhere the inner oval to the card front.

Stamp two mountain images from the HCPC-3893 Create a’scape Backcountry Stamp set in Jet Black ink on the watercolour card.  Colour in with Zig Clean Colour Brush Markers – one with blue/grey tones and the other with green/brown tones and die cut with the coordinating die.  Layer the mountains over the oval in the centre of the card.

Stamp three lake images from the HCPC-3895 Create a’scape Trout Lake Stamp in Jet Black ink on watercolour card.  Colour with Zig Clean Colour Brush Markers and die cut one complete lake image, one lake image and one trout image.  Layer the lake image over the complete image and then add Diamond glitter to the trout before adhering to the lake.  Adhere over the mountain images as shown.

Die cut an eyelet frame out of blue patterned paper using the eyelet and largest plain edge die from the HCD1-7157 Eyelet & Ovals Basic – Large Die set.  Adhere to oval cut from the paper panel.  Adhere this  panel to the front of the card using foam tape.

Stamp two duck images from the HCPC-3896 Create a’scape Nature Stamp set in Jet Black ink on watercolour card.  Colour with the images with Zig Clean Colour Brush Markers and then die cut with the coordinating die – one complete image and one with the front duck.  Adhere the duck to the complete image and then adhere to the front of the card – taking care not to cover the trout in the background image.

Stamp the tree images from the HCPC-3749 Snow Kissed Spruce Stamp in Library Green ink on watercolour card.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating dies.  Adhere the larger and smaller trees on either side of the oval.

Stamp the hollyhock images from the HCPC-3896 Create a’scape Nature Stamp set in Jet Black ink on watercolour card.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die.  Trim and tuck under the right front oval as shown.

Stamp the bulrush image from the HCPC-3895 Create a’scape Trout Lake Stamp set in Jet Black ink on watercolour card.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die.  Adhere to the right of the duck image as shown.

Stamp the rocks and grass image from the HCPC-3895 Create a’scape Trout Lake Stamp set in Jet Black ink on watercolour card.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die.  Adhere to the front of the card.

Stamp the fox image from the HCPC-3896 Create a’scape Nature Stamp set in Jet Black ink on watercolour card.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die.  Adhere to the bottom left of the card.

Stamp the wolf image from the HCPC-3893 Create a’scape Backcountry Stamp set in Jet Black ink on watercolour card.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die.  Adhere to the bottom right of the card.

Cut the sentiment from the paper collection and using the second smallest arrow die from the HCD1-7204 Arrows & Banner Die set die cut the dove tail.  Adhere to the top right as shown.

To finish, add Diamond glitter over the painted images and dot over the card.

I hope you have fun with your Wilderness Retreat collection.

Happy Crafting

Ka Kite Anu

Patricia

Wilderness Retreat Everyday Moments

Kia Ora Koutou

Welcome back to my second post for the release of the gorgeous Wilderness Retreat collection from Heartfelt Creations.

 

Products Used:

 

Other Products: Reeves watercolour card 300gsm, foam tape, Nuvo Pure Sheen Glitter – Diamond

For more tips on creating with the Wilderness Retreat Collection watch the tutorial at https://youtu.be/wJ3oZUANnE8.

Instructions:

Cut a piece of white cardstock 12” x 6”, score at 6” along the long side and fold to create a base card of 6” x 6”.  Cut a 6” x 6” panel from the paper collection.  Die cut the centre circle out using the die from the HCD1-7155 Circle Basics – Large Die set. Then cut the outer frame out using a craft knife and a ruler.  Add the outer frame to the card base using two layers of foam tape.  Add the inner frame to the card front using a single layer of foam tape.  Adhere the inner circle to the recess using Dries Clear glue.

Stamp two house and canoe images from the HCPC-3893 Create a’scape Backcountry Stamp in Jet Black ink on watercolour card.  Colour with Clean Colour Brush Markers and die cut with the coordinating die – one complete image and one the house, tree and canoe image only.  Adhere the house, tree and canoe to the complete image.  Adhere to the inner recess as shown.

Stamp the tree image from the HCPC-3749 Snow Kissed Spruce Stamp in Library Green ink on watercolour card.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating dies.  Adhere the small tree in the inner frame on the right of the card.

Stamp the barn image from the HCPC-3894 Create a’scape Wilderness Stamp set in Jet Black ink on watercolour card.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die.  Trim the tree from the image and adhere to the left on the inner frame using foam tape.

Stamp the deer images from the HCPC-3894 Create a’scape Wilderness Stamp set in Jet Black ink on watercolour card.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die.  Trim and adhere the doe to the outer frame on the left and the buck on the inner frame on the right as shown.

Stamp the tree stump image from the HCPC-3896 Create a’scape Nature Stamp set in Jet Black ink on watercolour card.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die.  Adhere to the bottom right of the card in front of the buck.

Stamp the hollyhock images from the HCPC-3896 Create a’scape Nature Stamp set in Jet Black ink on watercolour card.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die.  Trim and adhere to the right and left inner and outer frames using a combination of Dries Clear glue and some foam tape.

Stamp two rock and grass images from the HCPC-3895 Create a’scape Trout Lake Stamp set in Jet Black ink on watercolour card.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die.  Adhere one image to the bottom of the card with foam tape.  Trim the end of the other image and adhere to the bottom left.

Stamp the eagle, rabbit and squirrel image from the HCPC-3896 Create a’scape Nature Stamp set in Jet Black ink on watercolour card.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die.  Adhere the eagle to the top right with foam tape.  Adhere the squirrel on the tree stump and the rabbit to the middle of the card on the inner frame.

Cut the sentiment from the paper collection and adhere to the top of the card as shown.

Add Diamond glitter to the images with Dries Clear glue.

I hope you have a lot of fun with your Wilderness Retreat collection.

Happy Crafting

Ka Kite Anu

Patricia

Friendship in Bloom

Kia Ora Koutou

Welcome back and today I have another card for you from Heartfelt Creations.  I am very sad to see the Classic Petunia paper collection being retired as the papers are just so gorgeous!  However,  there are some amazing products waiting to be released over the next year and room needs to be made for them.

 

The petunias were so quick and easy to shape using the 3D Basic Flower Shaping Mold.

Be in quick to get your papers before it is too late.

Happy Crafting

Ka Kite Anu

Patricia

 

Christmas Bells are Coming For Christmas

Kia Ora Koutou

Welcome back and today I am sharing three cards made with the beautiful Christmas Bells paper, motifs and dies from Dress My Craft.

I am really loving the Christmas Bells collection from Dress My Craft for making Christmas cards.  The papers are just stunning with a wide range of different colours and patterns for all Christmas card makers.  I have used gold accents to highlight the gorgeous reds, pinks and greens.

 

My first card is a shaker card which is complemented by the absolutely stunning Christmas Hangings bells and baubles die.  This comes with a decorative die and a background die but I only used the decorative die in gold card to make a statement.  This paired really well with the circle dies in gold.  I have used Micro Sparkling Dust, Ice Cubes, Snow White Flower Pearls and Frosted Sugar Powder for the shaker elements to create the effort of snow.

 

My second card is festooned with poinsettias and lilies that frames baubles, garlands  and the very cute images from the motif sheet.

My final card is a non-traditional pink and gold card featuring red and gold poinsettias on a pink and gold combination.

 

 

 

Products Used:

Soft Floral Oriental Paper

Floral Oriental Paper

Christmas Bells Paper Collection

Christmas Bells Motif Sheet

Poinsettia Flower Set

Create a Flower Die

Foliage Leaves & Foliage Die #9

Christmas Hangings Die

Christmas Ornaments Die

Nesting Circles – Basic Designer Dies

Crochet Lace Borders Die

Stripes Background Die

Drop Shape Wire Pollen – Pastel Yellow

Flower Pearls – Golden

Flower Pearls – Snow White

Pointed Thread Pollen – Yellow

Crystal Ice Cube

Frosted Sugar Powder

Micro Sparkling Dust Glitter

Satin Ribbon Twine – Red

Multipurpose Scoring Board 12” x 12”

Groove Golf Tools Set

Paper Trimmer 6” x 12”

Non-stick Craft Mat – Thick

Embossing Foam Mat

Teflon Bone Folder

Easy Cuts Machine

Happy Crafting

Ka Kite Anu

Patricia

 

A Delicate Best Wishes Card

Kia Ora Koutou

Welcome back and today I am sharing a delicate best wishes card made using beautiful vellum Sun Kissed Fleur flowers.

 

Products Used:

Other Products: 

Ranger Distress Oxide ink – Spun Sugar, Dress My Craft Crystal Clear Sequins, Bazzill Smoothie card – Blush, Couture Creations Embossing Folder – Swiss Dots, Reeves Clear Gloss Gel, White cardstock, Pale pink narrow ribbon, iCraft stencil, Glue gun, Foam tape, Colorbox inks – Frost White, Olive Pastel, Spray Adhesive

For more tips on creating with the tags & sentiments, watch the tutorial at https://youtu.be/eAfLuNkRda4.

Instructions:

Cut a piece of white cardstock 10” x 7”, score at 5” along the long side and fold to create a base card of 5” x 7”.  Cut a piece of blush cardstock 5” x 7” and adhere to the front of the card.    Cut a piece of white cardstock 4 15/16” x 6 15/16” and die cut the circle slightly off centre at the top of the card as shown using the largest plain die from the HCD1-7153 Eyelet Circle & Basics – Small Die set.  Emboss partially with the Swiss Dots embossing folder and score the bottom half every 1/16” using the ScorPal board.  Cut a piece of white cardstock 4 ¾” x 5”.  Add Ultrafine Crystal glitter to some gloss gel and then stencil on the white card.  When dry add to the back of the embossed card with foam tape.  Die cut a circle frame using the eyelet and largest plain edge die from the HCD1-7153 Eyelet Circle & Basics – Small Die set out of white cardstock.  Add Frosting Powder to the frame using spray adhesive and adhere the frame to the circle opening.  Adhere this to the front of the card using foam tape.

Die cut the long eyelet tag from the HCD1-7201 Ticket and Tags Die set out of Blush cardstock.  Die cut the inner long tag out of white cardstock from the HCD1-7201 Ticket and Tags Die set and adhere to the blush eyelet tag.  Die cut the lace edge from the HCD1-7161 Sweetheart Borders set out of white cardstock and add Frosting Powder using spray adhesive. Adhere under one edge of the long eyelet tag and then adhere the entire tag over the join of the embossing on the card.

Die cut the outer round tag die from the HCD1-7203 Ornamental Tags Die set out of Blush cardstock.  Die cut the inner Best Wishes sentiment from the HCD1-7203 Ornamental Tags Die set out of white cardstock.  Add Frosting Powder to the die using spray adhesive and then adhere to the pink base.  Adhere to the centre of the long eyelet border as shown.  Add a pale pink ribbon bow to the top of the tag.

Stamp the flower images from the HCPC-3533 Sun Kissed Fleur Cling Stamp Set in Frost White ink on the vellum and heat emboss with the white Opaque embossing powder.  Colour the flowers with Spun Sugar ink and the leaves with Olive Pastel inks on the front of the embossed vellum.  Die cut with the coordinating die, spritz with water on the back and shape using groove golf tools.  Assemble with a hot glue gun when dry and pierce a hole in the centres of the flowers.  Insert one white bead stamen and white rock candy stamens and set with a hot glue gun.  Add Ultrafine Crystal Glitter to the flowers with Dries Clear glitter on a dry sponge.  Adhere around the circle as shown with a hot glue gun.

To finish, add translucent sparkling sequins to the centre of the circle as shown.

Happy Crafting

Ka Kite Anu

Patricia