Honey Bee Stamps: Lovely Layers – Wedding Bells

Kia ora Koutou

I have just purchased the beautiful Honey Bee Stamps: Layering Holiday Bells Honey Cuts and started off making a white and gold Christmas card. But I ended up going in a totally different direction in the end and made a wedding card with a bouquet of Honey Bee Stamps Lovely Layers flowers and leaves. Even though it looks totally different from what I initially imagined I am very happy with the results and I hope you like it too.

My Project.

For my card I have made a top folding 4 1/4″ x 5 1/2″ card base out of white cardstock. I cut a piece of gold card 4 1/4″ x 5 1/2″ and added it to the front of the card. I die cut a Delicate Daisy Cover Plate Base and Top out of white cardstock and layered them together before adding them to the front of the card.

I die cut an oval using the Amaizng Paper Grace Elegant Twist Oval dies out of gold cardstock and then die cut one oval using the outer and inner decorative twist dies out of white cardstock and added it to the gold base. I then die cut two decorative twist oval frames out of white cardstock and added it to the base oval which was then added to the front of the card.

I die cut the bells from the Honey Bee Stamps: Layering Holiday Bells Honey Cuts out of white and gold cardstock. I assembled them and then added a gold bow out of the same set and added them to the the inside of the oval frame with foam tape.

I have die cut, coloured and assembled the flowers and leaves from the following dies: Lovely Layers – Dianthus (coloured yellow), rosebuds from the Roses dies – coloured blush and green, leaves and lavenders from the Spring Greenery dies and the gold leaves are from the Winter Greenery set. These were all layered around the top of the bells to ressemble a wedding bouquet. To add a little glamour and sparkle I have added some Wink of Stella to the flowers.

To finish my card I have stamped the sentiments from the Honey Bee Stamps Mini Messages stamp set in Wow embossing ink and heat embossed with gold embossing powder. I die cut the sentiments out using the coordinating die set and added them to the card using foam strips.

I then added some gold pearls around the sentiment.

Products Used:

Honey Bee Stamps: Lovely Layers – Dianthus

Honey Bee Stamps: Lovely Layers – Spring Greenery

Honey Bee Stamps: Lovely Layers – Rose

Honey Bee Stamps: Lovely Layers – Winter Greenery

Honey Bee Stamps: Layering Holiday Bells Honey Cuts

Honey Bee stamps: Delicate Daisy – A2 Cover Plate Base Honey Cuts

Honey Bee Stamps: Delicate Daisy – A2 Cover Plate Top Honey Cuts

Honey Bee Stamps Mini Messages Stamp Set

Honey Bee Stamps Mini Messages Die Set

Amazing Paper Grace Elegant Twist Dies

Spellbinders Essentials Cardstock – Snowdrift

Heartfelt Creations Luxe Gold Cardstock

Neenah Classic Crest 80Ib Cardstock

Altenew inks – Lemon Ice, Blueberry, Orange Sorbet, Pistachio, Firefly

Pink Fresh Studio ink blending brushes

Pink Fresh Studio Gold Pearls

Foam tape

Bearly Art Glue

Wow Embossing Ink

Ranger Gold Embossing Powder

Wink of Stella – clear

Follow me on Facebook!

Follow me on Instagram!

Follow me on YouTube!

Happy Crafting

Patricia

Wedding Bells are in the Air

Kia Ora and Welcome

It is Wednesday again and today I am featuring two cards. One from the beautiful Classic Wedding Collection and the other from the gorgeous Sunrise Lily Collection  Please check out the other amazing creations from the Design Team here: https://www.heartfeltcreations.us/blog/595/stuck-creatively-creative-inspiration-and-a-step-by-step-video-for-you

The new medallion dies are just lovely and make a lovely background to pretty pink roses.

Instructions:

HCD1-279 Classic Wedding Paper Collection

HCD1-7144 Classic Wedding Decorative Medallion

HCD1-7134 Classic Wedding Bells Die

HCPC-3789 Classic Wedding Bells stamp

HCPC-3790 Classic Wedding Wishes Stamp

HCD1-7110 Classic Rose Die

HCPC-3752 Classic Rose Stamp

HCD1-7111 Classic Rose Vines Die

HCPC3753 Classic Rose Vines Stamp

HCD1-7113 Blushing Rose Stem Die

HCPC-3755 Blushing Rose Stamp

HCD2-750 Cut Mat 1B Create Dies

TSMP707 Memento Bamboo Leaves ink

TSMP900 Memento Tuxedo Black ink

TSBL32 Brilliance Pearlescent Coral ink

209277 Stampendous Aged Ivory Embossing Powder

HCDA2-45 Stack and Store Daubers

2451253D Crystal Lacquer

Deluxe Flower Shaping Kit H-401CST1

Other materials – white cardstock , Memento Grey Flannel

Instructions:  Create a card base by cutting a piece of card at 6” x 12”, score and crease at 6” to create a 6” x 6” card base.  Cut a 6” x 6” patterned panel from the Paper Collection and adhere to the base card.  Cut the semi-circular medallion patterned piece and the background in white cardstock.  Adhere the patterned piece over the base and adhere to the top of the card as shown.

Stamp the bell image from HCPC-3789 Classic Wedding Bells in Tuxedo Black and using the Stack and Store daubers colour the image.  I have used Bamboo Leaves for the leaves, Pearlescent Coral for the roses and the ribbons, and Grey Flannel lightly for the bell.  Shape the bell using the Deluxe Flower Shaping Kit and adhere to the card just under the medallion.  Finish the bell with the 3d Crystal Lacquer.

Stamp the leaves image from the HCPC-3755 Blushing Rose Stem Stamp with versamark and emboss with Aged Ivory embossing powder.  Using the Stack and Store daubers colour in the leaves with Bamboo ink and then die cut the image out using the coordinating die. Shape the leaves using the Deluxe Flower Shaping kit and adhere to the front of the medallion just above the bell.

Stamp the semi-circular image from the HCPC-3755 Blushing Rose Stamp set with versamark and emboss with Aged Ivory embossing powder.  Using the Stack and Store daubers colour the leaves with Bamboo Leaves and the Flowers with Pearlescent Coral.  Die cut them out using the coordinating die and shape before cutting in half to place on either side of the leaves at the top.

Stamp the sentiment from HCPC-3790 Classic Wedding Wishes Stamp on white cardstock with Tuxedo Black and die cut out using the small die from the HCD2-750 Cut Mat 1B Create Dies.  Using Dries Clear Glue add glitter around the edge of the sentiment and adhere to the bottom of the card using foam strips.

Stamp the leaves image from the HCPC-3755 Blushing Rose Stem Stamp set with versamark and emboss with Aged Ivory embossing powder.  Using the Stack and Store daubers colour in the leaves with Bamboo ink and then die cut the image out.  Adhere to the sides of the sentiment as shown.

To make the roses stamp the images from the HCPC-3752 Classic Rose Stamp set with Pearlescent Coral and colour the images in with the Coral ink before die cutting them out.  Shape using the Deluxe Flower Shaping kit and make different sizes.  Adhere to the card as shown.

I really love the colours in the Sunrise Lily Collection and I especially love the pink colours in the papers.  Here is a simple, yet elegant card that I have made with some lilies and the papers.

Instructions:

HCDP1-263 Sunrise Lily Paper

HCPC-3720 Sunrise Lily Stamp

HCD1-787 Sunrise Lily Die

HCPC-3721 Sunrise Lily Wishes Stamp

HCD1-789 Sunrise Lily Bouquet Die

HCPC-3354 Classic Message

HCD1-7120 Fleur Border basics

HCD1-761 Everyday Heroes

TSMP103 Memento Canteloupe

TSBL32 Brilliance Pearlescent Coral

HCST1-410 Deluxe Flower Shaping Kit

HCDA2-450 Stack and Store Daubers

PGM15016 Rajni Chawla’s Frosting Powder

Others Supplies – White cardstock, Brown cardstock, Versamagic Tea Leaves, Aloe Vera. Pearls, Couture Creations Tied Together Embossing Folder, foam dots, Heart of Gold Prills

Instructions: Cut a piece of white card 12” x 6” and score and crease at 6” along the long side to create a base card of 6” x 6”.  Cut a piece of patterned paper 4” x 6” and adhere to the bottom of the card front.  Cut a piece of white cardstock 6” x 6: and using the cutting edge from the Fleur Border Basics set cut a section out as shown.  Emboss the top section using the Tied Together embossing folder (I have used the back of the embossing for a more ‘quilted’ effect).  Adhere this piece at the top of the card over the patterned paper.  On a spare piece of white cardstock cut the lace edge from the Fleur Border Basics and adhere along the cut edge.

Stamp the flower image form the HCPC-3721 Sunrise Lily Wishes Stamp set using Pearlescent Coral and Tea Leaves and die cut using the coordinating die.  Using the stack and store sponge daubers colour the flowers with Canteloupe and Pearlescent Coral and colour the leaves with Aloe Vera.  Shape lightly using the Deluxe Flower Shaping kit and adhere along the lace edge using Dries Clear glue and foam dots.

For more information about making the Sunrise Lily flowers please click here: https://www.youtube.com/watch?v=9GxqgadNKNE

To make the lilies stamp the flower images from the HCP1-3720 Sunrise Lily Cling Stamp with the Pearlescent Coral ink and the leaves with Tea Leaves ink. Die cut with the coordinating die. Lightly sponge the centre of the flowers with Canteloupe and sponge the edges of the flowers with Coral ink.  Shape the flowers and assemble.  Using Dries Clear glue add Frosting Powder to the flowers and heat to set.  Die cut the stamens in brown cardstock from the HCD1-787 Sunrise Lily Die and shape them.  Add Heart of Gold Prills to the tips of the stamens using Dries Clear glue and then add to the centre of the lilies.  Adhere over the bouquet image as shown.  Sponge the leaves with Aloe Vera ink and sponge the edges with Tea Leaves and shape lightly with the Deluxe Flower Shaping kit and adhere around the lilies as shown.

Stamp the ‘Just for You” image from the HCPC-3354 Classic Message stamp set in Pearlescent Coral and using the arrow die from the HCD1-761 Everyday Heroes

Die set die cut the sentiment.  Sponge the edges with Pearlescent Coral and then adhere to the top right of the card as shown.

Add pearls to the embossing as shown.

Happy Crafting

Ka Kite Anu

Patricia