Classic Rose Tutorial

Kia Ora Koutou

Welcome back to a special tutorial for Heartfelt Creations featuring the fabulous Classic Rose stamp, die and mold die set.

Making roses is so easy with the coordinating 3D flower shaping molds.  The molds allow for consistent shaping and this tutorial will show you the step by step instructions to create different size roses to decorate your cards.

Directions:

 

Step 1:

Stamp the flowers with Magenta Hue ink on Deluxe Flower Shaping Paper.  Colour the flowers in the centres with Tiger Lily ink and the petals with Magenta Hue ink and die cut with the coordinating die.

Colour the edges of the petals with Cactus Flower ink and the backs of the smaller petals with Magenta Hue ink.

 

Stamp the leaves with Library Green ink on Deluxe Flower Shaping Paper.  Colour with Vivid Chartreuse and Magenta Hue inks and die cut with the coordinating die.

 

 

Step 2:

Place the petals and the leaves in the coordinating mold.  Spritz lightly on the back with some water and then run through your die cutting machine.

 

 

 

 

Step 3

To create the bud take the smallest petal and add Dries Clear glue to two opposing petals and join together.  When dry add the other three petals.  This can be used as a small bud as well as for the centre of the larger flowers.

 

Step 4

 

Shape the next size up petal with the stamped image on the outside and then add the small bud to the centre with Dries Clear glue.  This also makes a good bud to go with the bigger flowers and also rose centres.

Step 5

 

 

For the largest flower use three largest petals, one of each of the next sizes.  Assemble the three largest petals offsetting the petals each time.  Use two foam mats to get a deeper impression when assembling the flower.   Take the largest size of the smallest stamp set and shape into a bowl with the stamped side on the outside.  Add your previously made bud and add to the centre of this petal with Dries Clear glue.  Add this to the centre of the larger petals.

Step 6

For the second largest size flower use three of the smaller petals from the larger stamp set and one each of the other sizes.  Assemble the two layer bud as before.  Assemble the three larger petals offsetting each time as with the larger flower.  Add the largest petal from the smaller stamp set and adhere to the centre of the flower with the stamped side up.  Add the bud to the centre of the flower as shown.

Step 7

For the third sized flower take two of the largest size petals from the smaller stamp set and one each of the other sizes from the same stamp set.  Make a double petal bud as per previous instructions.  Assemble the two larger petals offsetting the petals and making a deep bowl.  Add the bud to the centre of the flower.

Step 8

For the smallest flower make a single petal bud.  Take two of the middle sized petals from the smaller stamp set and assemble together offsetting the petals and creating a bowl shape.  Add the bud with Dries Clear glue and leave to dry.

Step 9

To finish the flowers add Crystal Clear glitter using Dries Clear glue on a damp Hydra sponge.

 

 

Heartfelt Creations supplies:

HCPC-3752 Classic Rose Stamp

HCD1-7110 Classic Rose Die

HCFB1-462 3D Rose Shaping Mold

RACP614 Magenta Hue ink

RACP531 Vivid Chartreuse ink

RACP475 Library Green ink

HCPP1-475 Deluxe Flower Shaping Paper (50)

HCST1-401 Deluxe Flower Shaping Kit

PGM15015 Crystal Clear glitter

159723 Dries Clear Glue

352854 Metal Tip for Adhesive Bottles

35854 Hydra Sponge

HCDA2-450 Stack and Store Daubers

Other Supplies:

White cardstock

Tips

Allow the flowers to dry after removing from the mold.

Allow the flowers to fully dry after assembling them before adding glitter.

I hope I have inspired you to create some gorgeous roses for your own projects.

Happy Crafting

Ka Kite Anu

Patricia

Time for Tea and Roses

Kia Ora Koutou

Welcome back to Inspiration Wednesday and I have three posts for you again.  My first post is a lovely tea pot shaped card decorated with roses.

Products Used:

Special Teapot Cling Stamp SetHCPC-3903
Special Teapot DieHCD1-7286
Classic Rose Cling Stamp SetHCPC-3752
Classic Rose DieHCD1-7110
3D Rose Shaping MoldHCFB1-462
3D Leafy Accents Shaping MoldHCFB1-467
Leafy Accents Cling Stamp SetHCPC-3835
Leafy Accents DieHCD1-7193
Fresh Cut Hydrangea DieHCD1-7279
Fresh Cut Hydrangea Cling Stamp SetHCPC-3901
Deluxe Flower Shaping Paper Pack of 50 – WhiteHCPP1-475
Stack and Store Daubers-Pack of 30HCDA2-450
Pink Flambe Nuvo MousseNU813
Ranger Archival Ink Pad – Cactus FlowerRACP985
Ranger Archival Ink Pad – Magenta HueRACP614
Ranger Archival Ink Pad – Leaf GreenRACP436
Ranger Archival Ink Pad – Library GreenRACP475
Rajni Chawla’s Crystal ClearPGM15015

Other Products: 

White cardstock, Versamark ink

For more tips on creating with the Tea Time Collection watch the tutorial at https://youtu.be/4bjPeZW_oT8.

To see how to shape the roses, watch the video at https://youtu.be/Z8P070kC3oo.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: 

Cut a piece of white cardstock 10” x 7”, score at 5” along the long side and fold. Using the die from the HCPC-3903 Special Tea Pot Stamp set with the handle over the edge of the fold on the left, die cut the tea pot to create the shaped card base.

Stamp the image from the HCPC-3903 Special Tea Pot Stamp set in Versamark ink on Iris cardstock and heat emboss with gold embossing powder. Then stamp the sentiment from the same stamp set in Versmark ink and heat emboss with gold embossing powder. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die. Adhere to the front of the card.

Stamp the leaf images from the HCPC-3752 Classic Rose Stamp set in Library Green on Deluxe Flower Shaping Paper. Colour with Leaf Green and Magenta Hue inks and die cut with the coordinating die. Shape using the coordinating mold and add Crystal Clear glitter using Dries Clear glue on a damp sponge. Trim and add around the left of the sentiment and to the top of the handle.

Stamp the rose images from the HCPC-3752 Classic Rose Stamp set in Magenta Hue ink on Deluxe Flower Shaping Paper. Colour with Magenta Hue and Buttercup inks and die cut with the coordinating dies. Colour with Pink Flambe Embellishment Mouse and then shape using the coordinating mold. Assemble when dry into roses and add Crystal Clear glitter using Dries Clear glue on a damp sponge. Adhere the roses over the leaves as shown.

Stamp the bird and hydrangea image from the HCPC-3901 Fresh Cut Hydrangea Stamp set in Shadow Grey ink on Iris cardstock. Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die. Trim the birds, shape and then adhere above the leaves on the handle and to the right as shown with foam tape.

Please look out for my next blog post.

Happy Crafting

Ka Kite Anu

Patricia

 

 

Roses on Lace

Kia Ora Koutou

Welcome back to my second post and for this card I have made  a lovely lace  background  for  some  pretty purple  roses.

Products Used:

Rajni Chawla’s Frosting PowderPGM15016
Rajni Chawla’s Crystal ClearPGM15015
Groove Golf Tool SetDMCT4185
Deluxe Flower Shaping KitHCST1-401
Stack and Store Daubers-Pack of 30HCDA2-450
Designer Dries Clear Adhesive159723
Ranger Archival Ink Pad – Vivid ChartreuseRACP531
Ranger Archival Ink Pad – Library GreenRACP475
Ranger Archival Ink Pad – Leaf GreenRACP436
Ranger Archival Ink Pad – Magenta HueRACP614
Ranger Archival Ink Pad – Cactus FlowerRACP985
Celebrate Love Sentiments Cling Stamp SetHCPC-3847
Arrows and Banner DieHCD1-7204
Sweetheart Borders DieHCD1-7161
Lacy Diamond DieHCD1-7228
Eyelet Diamond DieHCD1-7227
Diamond Basics DieHCD1-7226
3D Leafy Accents Shaping MoldHCFB1-467

Other Products: 

Versamark ink, Ranger Silver Embossing Powder, white cardstock, Ranger Archival ink – Violet, spray adhesive, heavy cardboard

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

For more tips on creating with the diamond dies, watch the tutorial at https://youtu.be/JwS0Rmysd98.

Instructions: 

Cut a piece of white cardstock 10 x 7″, score at 5″ along the long side and fold to create a base card of 5 x 7″. Cut a piece of white cardstock 4 15/16 x 6 15/16″ and adhere to the card front with a piece of heavy cardstock 4 1/2 x 6 1/2″. Cut a piece of white cardstock 4 x 6″ and using the inner plain edge diamond die from the HCD1-7228 Lacy Diamond Die set die cut the inner diamond out. Die cut the decorative die from the HCD1-7229 Diamonds & Lace set and the plain edge die from the HCD1-7228 Lacy Diamond Die set out of white cardstock. Add Frosting Powder with spray adhesive before adhering to the front of the previously cut piece of white cardstock. Die cut the lacy edge using the outer lacy frame die and the inner diamond die from the HCD1-7228 Lacy Diamond Die set out of white cardstock. Add Frosting Powder using spray adhesive and adhere to the front of the Diamonds and Lace Die. Die cut the eyelet frame using the third largest eyelet diamond die from the HCD1-7227 Eyelet Diamond Die set and the inner diamond die from the HCD1-7228 Lacy Diamond Die set. Add Frosting Powder with spray adhesive and then adhere to the front of the Lacy Diamond. Die cut four lacy edges from the HCD1-7161 Sweetheart Borders Die set out of white cardstock. Add Frosting Powder using spray adhesive, trim and adhere to the back of the 4 x 6″ piece of white cardstock. Adhere this all to the card front with heavy cardboard. Die cut the inner lattice diamond using the inner plain edge die and the lattice diamond die from the HCD1-7228 Lacy Diamond Die set out of white cardstock. Add Frosting Powder using spray adhesive and then add to the centre of the lacy diamonds.

Stamp the sentiment from the HCPC-3847 Celebrate Love Stamp set in Versamark ink on white cardstock and heat emboss with silver embossing powder. Die cut the sentiment using the third smallest arrow die from the HCD1-7204 Arrows & Banners Die set and adhere to the middle of the diamond as shown.

Stamp the leaves from the HCPC-3834 Leafy Accents Stamp set in Library Green ink on Deluxe Flower Shaping Paper. Colour with Leaf Green ink and die cut with the coordinating dies. Shape using the coordinating Leafy Accents shaping mold and add Crystal Clear glitter on a damp sponge. Adhere to the left of the diamond.

Stamp the rose images from the HCPC-3752 Classic Rose Stamp set in Violet ink on Deluxe Flower Shaping Paper. Colour the centres with Vivid Chartreuse and the petals with Magenta Hue inks and die cut with the coordinating dies. Colour the backs with Magenta Hue ink and shape using coordinating Rose shaping mold and the Groove Golf Tools. Assemble roses and add Crystal Clear glitter with Dries Clear glue on a damp sponge. Add the roses next to leaves on card as shown.

Please watch out for my final blog post for this week.

Happy Crafting

Ka Kite Anu

Patricia

Lots of Tags

Kia Ora Koutou

Welcome back and today I have another 3 cards for Heartfelt Creations Inspiration Wednesday in 3 posts.  First up is a card with lots of tags.  I love how easy it is making tags with the Album Tags & Accents dies from Heartfelt Creations.  The Floral Fashionista papers make a perfect match with the gold cardstock and the vibrant pink Classic Roses.

Products Used:

Other Products: 

Ranger Archival ink – Violet, foam tape, gold thread, gold ribbon, Art Glitter Pearl Glitter, White Cardstock

For more tips on creating with the Floral Fashionista collection, watch the tutorial at https://youtu.be/9V6JOqdQtC8.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

To see how to shape the roses, watch the video at https://youtu.be/Z8P070kC3oo.

For more tips on creating with the pocket accent dies, watch the tutorial at https://youtu.be/A8sxtkGXWLQ.

Instructions: 

Cut a piece of white cardstock 10” x 7”, score at 5” along the long side and fold to create a base card of 5” x 7”. Cut a piece of patterned paper from the Floral Fashionista Paper collection 5” x 7”. Using the inner large tag die from the HCD1-7202 Album Tags & Accents Die set die cut the centre of the paper. Die cut a frame out of gold cardstock using the inner and outer large tag dies from the HCD1-7202 Album Tags & Accents Die set and adhere to the opening of the frame. Die cut the decorative die from the HCD1-7247 Regal Pocket Accents Die set out of gold cardstock and adhere to the back of the paper at the top of the frame. Die cut the large decorative die from the HCD1-7246 Fanci-Fold Pocket & Accents Die set out of gold cardstock, trim the edges and adhere behind the paper at the base of the frame. Adhere this to the front of the card with foam tape.

Die cut two small tags from the paper collection using the coordinating die from the HCD1-7203 Ornamental Tags Die set. Add to the left of the card using gold thread.

Stamp the leaf images from the HCPC-3752 Classic Rose Stamp set in Library Green on Deluxe Flower Shaping Paper. Colour with Leaf Green and Magenta Hue inks and die cut with the coordinating die. Shape using the coordinating mold, add Crystal Clear glitter using Dries Clear glue on a damp sponge and then adhere to the top left of the card.

Stamp the rose images from the HCPC-3752 Classic Rose Stamp set in Magenta Hue ink on Deluxe Flower Shaping Paper. Colour with Magenta Hue and Buttercup inks and die cut with the coordinating dies. Sponge the edges with Cactus Flower ink and then shape using the coordinating mold. Assemble when dry into roses and add Crystal Clear glitter using Dries Clear glue on a damp sponge. Adhere the roses to the top left over the leaves as shown.

Stamp the flower images from the HCPC-3835 Floral Fashionista Stamp set in French Ultramarine Blue on Deluxe Flower Shaping Paper. Colour the centres with Buttercup ink and die cut with the coordinating die. Shape using the coordinating mold and when dry, pierce the centres and insert white bead stamens. Add Pearl glitter to the flowers using Dries Clear glue on a damp sponge, trim the wires and adhere around the flowers as shown.

Tags: Die cut two outer tags from the HCD1-7201 Ticket & Tags Die out of gold cardstock. Die cut two inner tags from the paper collection using the inner tag die from the HCD1-7201 Ticket & Tags Die set and adhere to the gold outer tags. Add gold ribbon twine to the tags.

Stamp the leaf images from the HCPC-3752 Classic Rose Stamp set in Library Green ink on Deluxe Flower Shaping Paper. Colour with Leaf Green and Magenta Hue inks and die cut with the coordinating die. Shape using the coordinating mold and add Crystal Clear glitter using Dries Clear glue on a damp sponge. Adhere to the top of the tags. Add a small rose and a petite flower as shown.

To finish, add Ultrafine Crystal glitter to the flower images on the tags with Dries Clear glue.

I hope I have inspired you to use your tag dies in a different way.

Don’t forget to check out my next blog post.

Happy Crafting

Ka Kite Anu

Patricia

Regal Roses

Kia Ora Koutou

Welcome back to my second post for this week for Heartfelt Creations and this time I have a card featuring the very versatile Classic Rose set.  This time I have done some very simple roses to create a beautiful card.

Products Used:

Designer Dries Clear Adhesive159723
Classic Rose DieHCD1-7110
Leafy Accents DieHCD1-7193
Ticket and Tags DieHCD1-7201
Ornamental Tags DieHCD1-7203
Regal Frame & Accents DieHCD1-7248
Stack and Store Daubers-Pack of 30HCDA2-450
Calla Lily Paper CollectionHCDP1-2110
3D Rose Shaping MoldHCFB1-462
3D Leafy Accents Shaping MoldHCFB1-467
Classic Rose Cling Stamp SetHCPC-3752
Leafy Accents Cling Stamp SetHCPC-3835
Deluxe Flower Shaping Paper Pack of 50 – WhiteHCPP1-475
Bright Pearl Stamens-SmallHCS1-458-1
Rajni Chawla’s Crystal ClearPGM15015
Rajni Chawla’s Frosting PowderPGM15016
Ranger Archival Ink Pad – Leaf GreenRACP436
Ranger Archival Ink Pad – Library GreenRACP475

Other Products: 

White cardstock, spray adhesive, heavy cardstock

Click here for tips on using Elegant Pocket Dies.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

To see how to shape the roses, watch the video at https://youtu.be/Z8P070kC3oo.

Instructions: 

Cut a piece of white cardstock 10” x 7”, score at 5” along the long side and fold to create a base card of 5” x 7”. Cut a piece of checked paper 4 15/16” x 6 15/16” and adhere to the front of the card. Cut a piece of white cardstock 4 3/4″ x 6 3/4” and then cut a piece of pale green patterned paper and adhere to the front of the white cardstock. Die cut the centre using the outer plain edge die from the HCD1-7248 Regal Frame & Accents Die set and then adhere this to the card front with heavy cardstock. Die cut the decorative die out of the HCD1-7248 Regal Frame & Accents Die set using the outer decorative die and outer plain die from white cardstock. Add Frosting Powder with spray adhesive and then adhere to the card front. Die cut the lattice frame using the outer and inner plain edge dies, add Frosting Powder with spray adhesive and then adhere to the inner recess. Die cut the inner oval out of light green patterned paper and adhere to the centre. Die cut the inner decorative die from the HCD1-7248 Regal Frame & Accents Die set out of white cardstock, add Frosting Powder with spray adhesive and adhere to the centre.

Stamp the leaf images from the HCPC-3834 Leafy Accents Stamp set in Library Green ink on Deluxe Flower Shaping Paper. Colour with Magenta Hue and Leaf Green inks and die cut with the coordinating die. Shape using the coordinating mold and when dry add Crystal Clear glitter using Dries Clear glue on a damp sponge. Adhere to the right of the decorative die as shown.

Stamp the rose images from the HCPC-3752 Classic Rose Stamp set in Magenta Hue ink on Deluxe Flower Shaping Paper. Colour with Buttercup and Magenta Hue inks and die cut with the coordinating dies. Sponge the edges of the petals with Cactus Flower ink and shape using the coordinating mold. Assemble when dry and add Crystal Clear glitter using Dries Clear glitter on a damp sponge. Pierce the centres and insert the light gold pearl stamens with a wire and seal with Dries Clear glue. Add Crystal Clear glitter with Dries Clear glue on a damp sponge, trim the stamens and then adhere over the leaves.

Die cut the sentiment out of white cardstock using the die from the HCD1-7203 Ornamental Tags set. Add Frosting Powder with Dries Clear glue. Die cut the long rectangle out of checked paper using the long rectangle die from the HCD1-7201 Ticket & Tags Die set and trim to fit the sentiment. Shape and adhere as shown.

Please watch out for my final card.

Happy Crafting

Ka Kite Anu

Patricia

 

A Scenic Shadow Box Card

Kia Ora Koutou

Welcome back to a special blog post for Heartfelt Creations featuring the beautiful Camelia Carnation collection on a shadow box card.

Let’s get crafting!

Directions:

 

Cut a piece of white cardstock 12” x 6”, score at 6” along the long side and fold to create a base card of 6” x 6”.  Cut a 6” x 6” panel from the paper collection and adhere to the front of the card.

 

 

To create the shadow box cut a piece of patterned paper with the outdoor scene from the paper collection 4 15/16” x 4 15/16” and adhere to the back of the box.

Cut a 6” x 6” panel from the paper collection and using the shadow box as template draw around the inner edge with a pencil and die cut with the square die from the Cut Mat Create 2A die set.

Die cut the decorative die from the HCD1-7212 Petite Pocket Accents Die set out of white cardstock and trim before adhering to the back of the shadow box front.

 

Assemble the box and adhere the cut frame to the front of the shadow box and the strips to the sides of the box.  Adhere the shadow box to the card front.

Cut four dies from the HCD-7190 Frame a Card Leafy Borders set out of white cardstock.  Sponge with Viridian ink and add Frosting Powder to the dies.  Adhere to the bottom right and top left of the shadow box.

 

Stamp the flourish image from the HCPC-3808 Fanciful Carnation Stamp set in Bright Tangelo ink.  Colour with Tea Rose and Leaf Green inks and die cut with the coordinating die.  Shape using the Deluxe Flower Shaping Kit and add Crystal Clear glitter with Dries Clear glue on a damp sponge.

 

Stamp the carnation images from the HCPC-3806 Small Camelia Carnation Stamp set in Bright Tangelo ink on Deluxe Flower Shaping paper.  Colour with Rose Madder ink and die cut with the coordinating die.  Sponge the Edges with Bright Tangelo ink and then shape using the 3D Basic Flower Shaping Mold and fold the edges with your fingers.

 

Assemble the flowers 3 of the same size and 1 smaller.  Add three peach coloured bead stamens to the centre of the flowers with a hot glue gun.  Trim the ends and add Crystal Clear Glitter to the flowers with Dries Clear glue on a damp sponge.

Stamp the leaf images from the HCPC-3806 Small Camelia Carnation Stamp set in Library Green ink on Deluxe Flower Shaping Paper.  Colour with Leaf Green ink and die cut with the coordinating die.  Shape using the Deluxe Flower Shaping Kit.  Add Crystal Clear glitter to the leaves using Dries Clear glue on a damp sponge.

Adhere the flourish to the bottom right corner and then add the flowers and leaves with the hot glue gun.

Stamp the leaf images from the HCPC-3806 Small Camelia Carnation Stamp set in Library Green ink on Deluxe Flower Shaping Paper.  Colour with Leaf Green and Magenta Hue inks and die cut with the coordinating die.  Shape using the 3D Leafy Images mold and when dry add Crystal Clear glitter with Dries Clear glue on a damp sponge.

 

Trim and adhere the leaves over the top right of the shadow box.

Stamp the rose images from the HCPC-3752 Classic Rose Stamp set in Magenta Hue ink.  Colour the centres with Buttercup ink and die cut with the coordinating dies.  Sponge the edges with Magenta Hue ink and colour the backs of the two smallest images with Magenta Hue.  Shape using the coordinating mold.  When dry assemble the roses and add Frosting Powder glitter to the flowers using Dries Clear glue on a damp sponge.  Adhere the roses over the leaves.

Die cut the tag using the tag die from the HCD1-7201 Ticket and Tag Die set and nestle the tag among the carnations at the bottom of the shadow box.

And here is the card again:

Heartfelt Creations supplies:

HCD1-285 Camelia Carnation Paper Collection

HCPC-3806 Small Camelia Carnation Stamp

HCD1-7164 Small Camelia Carnation Die

HCPC-3808 Fanciful Carnation Stamp

HCD1-7166 Fanciful Carnation Die

HCPC-3752 Classic Rose Stamp

HCD1-7110 Classic Rose Die

HCFB1-462 3D Rose Shaping Mold

HCPC-3835 Leafy Accents Stamp

HCD1-7193 Leafy Accents Die

HCFB1-467 3D Leafy Accents Mold

HCD2-751 Cut Mat Create 2A Die

HCD-7190 Frame a Card Leafy Borders

HCD1-7201 Ticket and Tag Die

HCD1-7212 Petite Pocket Accents Die

HCBC1-456-2 Card Shadow Box Set – White

HCDA2-450 Stack and Store Daubers

RACP436 Ranger Archival ink – Leaf Green

RACP475 Ranger Archival ink – Library Green

RACP487 Ranger Archival ink – Bright Tangelo

RACP614 Ranger Archival ink – Magenta Hue

TSMP632 Ranger Archival ink – Buttercup

59723 1 Art Glitter Dries Clear

PGM15015 Rajni Chawla’s Crystal Clear

PGM15106 Rajni Chawla’s Frosting Powder

HCS1-457-3 Pastel Bead Stamens – Medium

Other Supplies:

White cardstock, Hot Glue Gun

Have fun creating with these amazing shadow boxes and take your crafting to the next level.

Happy crafting

Ka Kite Anu

Patricia

 

 

 

 

Heartfelt Creations supplies:

 

HCD1-285 Camelia Carnation Paper Collection

HCPC-3806 Small Camelia Carnation Stamp

HCD1-7164 Small Camelia Carnation Die

HCPC-3808 Fanciful Carnation Stamp

HCD1-7166 Fanciful Carnation Die

HCPC-3752 Classic Rose Stamp

HCD1-7110 Classic Rose Die

HCFB1-462 3D Rose Shaping Mold

HCD2-751 Cut Mat Create 2A Die

HCD-7190 Frame a Card Leafy Borders

HCD1-7201 Ticket and Tag Die

HCD1-7212 Petite Pocket Accents Die

HCBC1-456-2 Card Shadow Box Set – White

HCDA2-450 Stack and Store Daubers

RACP436 Ranger Archival ink – Leaf Green

RACP475 Ranger Archival ink – Library Green

RACP487 Ranger Archival ink – Bright Tangelo

RACP614 Ranger Archival ink – Magenta Hue

TSMP632 Ranger Archival ink – Buttercup

59723 1 Art Glitter Dries Clear

PGM15015 Rajni Chawla’s Crystal Clear

PGM15106 Rajni Chawla’s Frosting Powder

HCS1-457-3 Pastel Bead Stamens – Medium

 

Other Supplies:

White cardstock, Hot Glue Gun

 

 

Making Heartfelt Creations Classic Roses the Easy Way

Kia Ora Koutou

Welcome back and today I want to share with you a quick and easy way to create beautiful flowers for your papercrafting projects with Heartfelt Creations Classic Rose stamp, die and mold combo that I have done for Heartfelt Creations.

Here is the card that I have made with these flowers:

I have full video tutorials on how to make this card and the flowers and leaves to embellish it available for purchase on my website here: https://patriciascreativecorner.co.nz/collections/digital-tutorials

Happy Crafting

Ka Kite Anu

Patricia