Elegant Shaped Easel

Kia Ora Koutou

Who is excited for Black Friday? Heartfelt Creations are releasing some fabulous must have dies today and I can’t wait to show you my creations! First up is an elegant easel card featuring beautiful handcrafted roses.

For more details on the products I have used please visit here.

Thank you to Heartfelt Creations for sending me those products.

Instructions:

Cut a piece of Deluxe Flower Shaping paper 10 1/2″ x 7 1/2″, score at 5 1/4″ and fold. Die cut the shaped base using the No. 1 die from the HCD2-7384 Fancy Classic Rectangle Frame Die set with one side slightly over the folded edge. Score halfway across one side of the card to create the easel component of the card. Cut a piece of white cardstock using the No. 1 die from the HCD2-7384 Fancy Classic Rectangle Frame Die out of white cardstock and adhere to the bottom half of the easel component. Die cut two pieces of light pattern paper using the No. 1 die from the HCD2-7384 Fancy Classic Rectangle Frame Die set and adhere to the front of the card and to the base of the card. Trim the excess of the base of the card to enable the card to fold in half.

Die cut two decorative dies using the No. 2 die from the HCD2-7384 Fancy Classic Rectangle Frame Die set – one out of silver cardstock and one out of white cardstock. Adhere the silver outer frame to the top of the white outer frame and adhere to the front of the card. Adhere the white inner die to the centre of the frame.

Die cut two middle frames using the No. 3 die from the HCD2-7384 Fancy Classic Rectangle Frame Die – one out of white cardstock and one from silver cardstock.  Adhere the silver die to the white die and adhere to the front of the card as shown.

Die cut two inner dies using the No. 4 die from the HCD2-7384 Fancy Classic Rectangle Frame Die set – one out of white cardstock and one out of silver cardstock. Adhere the white die over the silver die slightly offsetting it and adhere to the middle of the frames. 

Die cut two inner decorative dies using the No. 5 die from the HCD2-7384 Fancy Classic Rectangle Frame Die – one out of white cardstock and one out of silver cardstock. Adhere the silver die cut to the white die cut and then adhere to the centre of the card as shown.

Repeat the same process for the base of the card.

Stamp the rose leaf images from the HCPC-3752 Classic Rose Cling Stamp set in Northern Pine ink on Deluxe Flower Shaping Paper. Colour the images with Garden Patina ink and die cut with the coordinating die. Shape using the coordinating mold and add Crystal Clear glitter with clear gloss gel medium. Trim and adhere around the left of the frames and to the bottom right of the base frames as shown.

To create the roses stamp the rose images from the HCPC-3752 Classic Rose Cling Stamp set in Magenta Hue ink on Deluxe Flower Shaping Paper. Colour the flowers with Angel Pink ink and Magenta Hue in the centres of the flowers and die cut with the coordinating dies. Colour the backs of the flowers with Angel Pink ink and the edges front and back with Magenta Hue ink. Shape the petals using golf tools and assemble with hot glue. Add Crystal Clear glitter using clear gloss gel medium and adhere over the leaves on the left on the front of the card and on the bottom right of the base of the card to create the ledge for the easel card.

For the small flowers stamp the little flower images from the HCPC-3752 Classic Rose Cling Stamp set in Magenta ink on Deluxe Flower Shaping Paper. Colour the flowers with Angel Pink ink and the centres with Magenta Hue ink and die cut with the coordinating die. Colour the backs of the flowers and the edges front and back with Magenta Hue.  hape using the groove golf tool, pierce the centres, insert a magneta coloured bead stamen and secure with hot glue. Add Crystal Clear glitter using clear gloss gel medium, trim and add around the larger roses as shown.

Stamp the sentiment from the HCPC-3847 Celebrate Love Sentiments Cling Stamp Set using embossing ink on vellum and heat emboss with silver embossing powder.  Die cut using the No. 6 die from the HCD1-7204 Arrows and Banner Die set and adhere to the centre of the dies on the top of the card as shown.

To finish, add iridescent gems to the banner and on the decorative dies as shown.

Other Products:

Memento ink – Angel Pink, clear gloss gel medium, Hero Arts Embossing and Watermark ink, Ranger Silver Embossing Powder, iridescent gems, hot glue gun

Follow me on Instagram!

Follow me on YouTube!

Happy Crafting

Ka Kite Anu

Patricia

Lush Lilac Interlocking Card

Kia Ora Koutou

Welcome back to my second post featuring the stunning Black Friday release from Heartfelt Creations.  The Lush Lilac collection was perfect for the this interlocking card.

Here is a wee video of this card to really show you how it has all come together:

nk

https://youtu.be/avQbVuhWdrA

Products Used:

Other Products: 

iCraft Iris cardstock, Magnets, White cardstock, Spray Adhesive, Foam Tape, Brilliance Pearlescent ink – Lavender,

For more tips on creating with the Lush Lilac collection, watch the tutorial at https://youtu.be/KDbdzC0MnAI.

For more tips on creating with the Window Scene cards & dies, watch the tutorial at https://youtu.be/LnM95GR92ao.

Instructions:

Front

Add a small magnet to the right flap.  Die cut two semi-circles from green patterned paper.  Die cut two lattice semi-circles with the eyelet edge out of white cardstock.  Sponge the edges with Pearlescent Lavender ink, spray with spray adhesive and add Frosting Powder.  Adhere the green paper to the back of the die cuts and adhere to the two side flaps.  Die cut two outer latch dies and two inner latch dies from the HCD1-7285 Window Hinges Die set out of gold cardstock.  Adhere the two inner dies together and then adhere to the outer die cut.  Adhere a magnet to the back of the lock and then adhere the second outer die to the back of the lock to cover the magnet.  Adhere the lock to the left flap.

Stamp four small lilac images from the HCPC-3817 Lush Lilac & Umbrella Stamp set in Jet Black ink on Iris card.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die.  Add Crystal Clear glitter to the images with Dries Clear glue on a dry sponge and adhere to the front flaps with foam tape.

Stamp the lilac flower images from the HCPC-3816 Lush Lilac Stamp set in Pearlescent Lavender ink on Deluxe Flower Shaping Paper.  Colour with with Lavender ink and die cut with the coordinating die.  Shape using the 3D Lilac Flower Shaping Mold and add Crystal Clear glitter using Dries Clear glue on a damp sponge.  Adhere the lilac flowers to the lilac image and add Lavender & Lace Prills to the centres.

Top and Bottom Flaps

Die cut two semi-circles from purple patterned paper.  Die cut two lattice semi-circles with the eyelet edge out of white cardstock.  Sponge the edges with Pearlescent Lavender ink, spray with spray adhesive and add Frosting Powder.  Adhere the purple paper to the back of the die cuts and adhere to the two flaps.  Stamp two large lilac sprays from the HCPC-3817 Lush Lilac & Umbrella Stamp set in Jet Black ink on Iris card.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die.   Shape and add Crystal Clear glitter using Dries Clear glue on a dry sponge and adhere to the top and bottom flaps.

Inside flaps

Die cut two large circles from green patterned paper and two from purple patterned paper using the large circle die from HCD1-7272 Rounded Sunlight Window Die set and cut in half.  Sponge the edges with the Lavender ink and adhere the two green semi-circles to the left and right flaps and the purple semi-circles to the top and bottom flaps.  Stamp the small lilac sprays from the HCPC-3816 Lush Lilac Stamp set using Jet Black ink on Iris cardstock.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die.  Add Crystal Clear glitter using Dries Clear glue on a dry sponge and add to the side flaps.  Add Lavender & Lace Prills to the centres of the lilacs.

Inside

Cut a 6” X 6” panel from the paper collection and sponge the edges with Lavender ink before adhering to the back of the card.  Die cut the outer decorative die from the HCD1-7271 Rounded Window Frame Die set out of white cardstock.  Sponge the edge with Lavender ink and add Frosting Powder with Dries Clear glue on a damp sponge and then adhere to the panel.  Die cut the eyelet circle from the HCD1-7154 Eyelet Circle & Basics – Small set out of white cardstock.  Sponge the edge with Lavender ink and add Crystal Clear to the edge with Dries Clear glue on a damp sponge.  Adhere to the centre of the decorative die.  Die cut the cottage image from the Lush Lilac paper collection using the largest plain edge die from the HCD1-7155 Circle Basics – Large Die set, sponge the edges with Lavender  ink and adhere to the middle of the decorative oval as shown.

Stamp the scroll image and sentiment from the HCPC-3818 Scroll & Notes Stamp set in Jet Black ink on Iris cardstock.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die.  Add Crystal Clear glitter to the flowers using Dries Clear glue on a dry sponge.   Adhere to the bottom left of the panel and add Lavender & Lace Prills to the flower centres.

Add Ultrafine Crystal glitter to the cottage image using Dries Clear glue.

Happy Crafting

Ka Kite Anu

Patricia

Wild Aster Black Friday

Kia Ora Koutou

Welcome to my second post for Black Friday and I have another window card for Heartfelt Creations.  I am so excited to see Heartfelt Creations have released their own gold cardstock which is perfect for the window cards.

Products Used:

Designer Dries Clear Adhesive159723
Zig Clean Color Real Brush Markers – 36 Pack478455
Clear Cardstock 8.5 x 11GBKK811B1
6″ x 6″ Swing Fold Card – WhiteHCCB1-482
Eyelet Circle & Basics Small DieHCD1-7154
Circle Basics Large DieHCD1-7155
Ticket and Tags DieHCD1-7201
Wild Aster DieHCD1-7257
Wild Aster Spray DieHCD1-7258
Wild Aster Scroll & Cluster DieHCD1-7259
Swirly Accent Spray DieHCD1-7263
Rounded Window Frame DieHCD1-7271
Rounded Sunlight Window DieHCD1-7272
Rounded Lattice Window DieHCD1-7274
Window Hinges DieHCD1-7285
Wild Aster Paper CollectionHCDP1-2106
Window Scenes Paper CollectionHCDP1-2109
Luxe Gold CardstockHCGP1-488

Other Products: 

iCraft Iris Cardstock, Prills – Lavender & Lace, Colorbox ink – Wisteria, Nuvo Pure Sheen Glitter – Diamond

Instructions:

Front

Using the two semi-circular dies from the HCD1-7274 Rounded Lattice Window Die set die cut two windows out of the front of the card.  Die cut a large circle out of clear cardstock using the large circle die from the HCD1-7272 Rounded Sunlight Window Die set and adhere to the front of the card.  Die cut a large circle from the HCD1-7272 Rounded Sunlight Window Die set out of green patterned paper out from the paper collection.  Die cut two windows out using the semi-circular dies from the HCD1-7274 Rounded Lattice Window Die set out of the green circle and adhere to the front of the card.  Die cut two windows using a combination of the window dies from the HCD1-7272 Rounded Sunlight Window Die out of gold cardstock.  Adhere to the front of the card as shown. Die cut an outer latch and two inner small latches from the HCD1-7285 Window Hinges Die set out of gold cardstock.  Adhere the inner latches together and adhere to the front of the windows as shown.  Adhere the two outer latches together and add to the inner latch.  Die cut on outer layer and two inner handles from the HCD1-7285 Window Hinges Die set out of gold cardstock.  Adhere the two inner handles together and glue to the outer handle.  Adhere a magnet to the back of the handle and then adhere to the right side of the front as shown.

Stamp the images from the HCPC-3889 Wild Aster Scroll & Cluster Stamp and HCPC-3888 Wild Aster Spray Stamp sets in Jet Black ink on Iris cardstock.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die.  Shape and add Crystal Clear glitter to the images using Dries Clear glue on a dry sponge.  Adhere to the bottom front of the card.  Add Go Man Go Prills to the centres of the flowers and Lavender & Lace Prills to the aster spray with Dries Clear glue.

Stamp the flower images from HCPC-3887 Wild Aster Stamp set using Majestic Violet ink on Deluxe Flower Shaping Paper.  Colour with Cactus Flower ink and die cut with the corresponding die.  Colour the edges with Vibrant Fuchsia and shape using the Deluxe Flower Shaping Kit.  Assemble and add Crystal Clear glitter to the flowers and Go Man Go Prills to the centres of the flowers.  Adhere to the base of the card front.

Die cut a tag from the Wild Aster Paper Collection using the small tag die from the HCD1-7201 Ticket & Tags Die and adhere among the flowers as shown.

Left inside window.

Die cut a large circle out of dark pink patterned paper using the large circle die from the  f HCD1-7272 Rounded Sunlight Window Die out of the paper collection.  Die cut two windows out using the semi-circular dies from the HCD1-7274 Rounded Lattice Window Die set out of the green circle and adhere to the card.  Die cut two windows using a combination of the window dies from the HCD1-7272 Rounded Sunlight Window Die out of gold cardstock.  Adhere to the card as shown.

Right side

Adhere a magnet to the right side to match the magnet on the front.  Cut a 6” x 6” piece of dark pink patterned paper from the paper collection and adhere to the card.  Cut a circle out of the blossom patterned paper using the large circle die from the HCD1-7272 Rounded Sunlight Window Die set and adhere to the front of the card.  Die cut the corner dies from the HCD1-7263 Swirly Accent Spray Die set out of gold cardstock and adhere to the corners.

Add Diamond glitter to the image using Dries Clear glue.

Left Back

Cut a 6” x 6” panel featuring purple asters and adhere to the left back. Die cut an outer decorative die from the HCD1-7271 Rounded Window Frame Die set out of white cardstock, sponge the edges with Wisteria ink and add Crystal Clear glitter using Dries Clear glue on a damp sponge and add to the card.  Die cut the eyelet circle using the eyelet edge die from the HCD1-7154 Eyelet Circle & Basics – Small set die out of white cardstock.  Adhere to the decorative circle.  Die cut a plain circle out of patterned paper from the Wild Aster Paper Collection using the largest plain edge die from the HCD1-7155 Circle Basics – Large Die set, sponge the edges with Wisteria ink and adhere to the eyelet circle.  Die cut the inner decorative circle from the HCD1-7271 Rounded Window Frame Die using the outer decorative and inner lattice die.  Die cut another lattice circle using the third largest die from the HCD1-7154 Eyelet Circle & Basics – Small set and the lattice die from the HCD1-7271 Rounded Window Frame Die set.  Sponge with Wisteria ink and add Frosting Powder using spray adhesive.  Adhere to the front of the inner decorative die and then add to the middle of the large decorative die.

Stamp the scroll image from the HCPC-3889 Wild Aster Scroll & Cluster Stamp set in Jet Black ink on Iris cardstock.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die.  Add Crystal Clear glitter to the flowers using Dries Clear glue on a dry sponge and then adhere to the front of the lattice.

Right Back

Cut a 6” x 6” panel featuring purple asters and adhere to the left back. Die cut an outer decorative die from the HCD1-7271 Rounded Window Frame Die set out of white cardstock, sponge the edges with Wisteria ink and add Crystal Clear glitter using Dries Clear glue on a damp sponge and add to the card.  Die cut the eyelet circle using the eyelet edge die from the HCD1-7154 Eyelet Circle & Basics – Small set die out of white cardstock.  Adhere to the decorative circle.  Die cut a plain circle out of patterned paper from the Wild Aster Paper Collection using the largest plain edge die from the HCD1-7155 Circle Basics – Large Die set, sponge the edges with Wisteria ink and adhere to the eyelet circle.

Stamp the large aster spray and the small aster spray images from the HCPC-3888 Wild Aster Spray Stamp set in Jet Black ink on Iris cardstock.  Colour with Zig Clean Colour Brush Markers and die cut with the coordinating die.  Shape and add Crystal Clear using Dries Clear glue on a dry sponge.  Adhere to the decorative die as shown.  Add Go Man Go Prills to the flower centres and Lavender & Lace Prills to the small aster spray.

Happy Crafting

Ka Kite Anu

Patricia

Sweet Peony Black Friday

Kia Ora Koutou

Welcome to a very special post featuring the new Black Friday release from Heartfelt Creations.  There are some amazing new dies and shaped cards to take your cardmaking to the next level.

 

Products Used:

Designer Dries Clear Adhesive159723
Groove Golf Tool SetDMCT4185
6″ x 6″ Round Bi-Fold Card – WhiteHCCB1-481
Wildwood Florals DieHCD1-7125
Eyelet Circle & Basics Small DieHCD1-7154
Circle Basics Large DieHCD1-7155
Small Sweet Peony DieHCD1-7173
Large Sweet Peony DieHCD1-7174
Ticket and Tags DieHCD1-7201
Rounded Window Frame DieHCD1-7271
Rounded Sunlight Window DieHCD1-7272
Rounded Eyelet Window DieHCD1-7273
Window Hinges DieHCD1-7285
Window Scenes Paper CollectionHCDP1-2109
Sweet Peony Paper CollectionHCDP1-288
3D Floral Basics Shaping MoldHCFB1-464
Wildwood Florals Cling Stamp SetHCPC-3769
Small Sweet Peony Cling Stamp SetHCPC-3819

Other Products: 

Glue Gun, Magnets, Pearls, Brilliance Pearlescent ink – Lavender

For more tips on creating with the Window Scene cards & dies, watch the tutorial at https://youtu.be/LnM95GR92ao.

To see how to shape the peony, watch the video at https://youtu.be/L9_MLkvpGPQ.

Instructions:

Front side panels

Adhere a small magnet to the right front panel.  Die cut two pink patterned papers out of the paper collection using the semi-circle dies from the HCD1-7273 Rounded Eyelet Window Die set.  Die cut two of the decorative dies from the HCD1-7273 Rounded Eyelet Window die set out of white cardstock.  Sponge the edges with Vibrant Fuchsia inks and add Frosting powder to the dies using spray adhesive.  Adhere the pink semi-circle die cuts to the decorative dies and then adhere to the side flaps.

Die two outer latch and two inner latches from the HCD1-7285 Window Hinges Die out of white cardstock.  Sponge all the edges using Vibrant Fuchsia ink and adhere the two inner latch dies together and then add to one of the outer latches.  Add a magnet on the back on the latch on one side and then adhere the second outer latch to cover the magnet.  Adhere the latch to the left flap.

Stamp the peonie images from the HCPC-3819 Small Sweet Peony Stamp and HCPC-3820 Large Sweet Peony Stamp sets in Rose Madder ink on Deluxe Flower Shaping Paper.  Colour the centres of the flowers with Sunflower ink and the rest of the flowers with Rose Madder and Tea Rose inks and die cut with the coordinating dies.  Colour the back of the flowers with Rose Madder ink and then shape using the 3D Floral Basics Flower Shaping Mold.  Finish shaping with the groove golf tools.  When dry pierce the centres of the flowers and add yellow bead stamens and assemble with a glue gun.  Add Crystal Clear glitter with Dries Clear glue on a damp sponge. Adhere to the front of the side flaps as shown.

Stamp the leaves from the HCPC-3819 Small Sweet Peony Stamp and HCPC-3820 Large Sweet Peony Stamp sets in Library Green ink on Deluxe Flower Shaping Paper.  Colour with Leaf Green ink and die cut with the coordinating die.  Colour the backs of the leaves with Leaf Green ink and shape using the groove golf tools.  Add Crystal Clear glitter using Dries Clear glue on a damp sponge and then adhere around the peonies as shown.

Stamp the flower images from HCPC-3769 Wildwood Florals Stamp set in Lavender ink on Deluxe Flower Shaping paper.  Colour the images in Lavender ink and die cut with the coordinating die.  Shape using the Deluxe Flower Shaping kit and when dry pierce a hole in the centres and add a white pastel stamen to the centres.  Add Crystal Clear glitter to the flowers, trim the wires and adhere around the peonies and leaves.

Add pearls to the decorative die as shown.

Inside Flaps

Die cut a large circle using the plain edge die from the HCD1-7271 Rounded Window Die and cut down the centre of the circle.  Sponge the edges with Vibrant Fuchsia ink and adhere to the inside flaps.

Inside Back

Cut a 6” x 6” panel from the paper collection and trim the sides slightly to fit into the back.  Sponge the edges and adhere to the back.

Die cut the outer decorative edge from the HCD1-7271 Rounded Window Frame Die out of white cardstock.  Sponge the edge with Vibrant Fuchsia ink and add Frosting Powder with Dries Clear glitter on a damp sponge.  Adhere to the back of the card.  Die cut the eyelet circle from the … out of white cardstock, sponge the edge with Vibrant Fuchsia ink and add Frosting Powder using Dries Clear glitter on a damp sponge.  Adhere to the middle of the decorative circle.  Die cut the patterned paper from the Sweet Peony Paper Collection using the largest plain edge die from the HCD1-7155 Circle Basics – Large Die set Sponge the edge with Vibrant Fuchsia ink and adhere to the eyelet circle.  Die cut the inner decorative circle from the HCD1-7271 Rounded Window Frame Die using the outer decorative and inner lattice die.  Die cut another outer decorative circle using the third largest die from the HCD1-7154 Eyelet Circle & Basics – Small die set and the inner decorative die from the HCD1-7271 Rounded Window Frame Die set, sponge with Vibrant Fuchsia ink and add Frosting Powder using spray adhesive.  Adhere to the front of the inner decorative die and then add to the middle of the large decorative die.

Die cut the tag from the Sweet Peony Paper Collection using the tag die from the HCD1-7201 Ticket & Tags Die set and adhere to the middle of the lattice as shown.

I am sure that you will have so much fun with these new products.

Happy Crafting

Ka Kite Anu

Patricia

 

Black Friday at Heartfelt Creations Part 1

Kia Ora Koutou

Welcome to Black Friday.  Once again Heartfelt Creations has done it with an innovative Insta-Album and some stunning dies.  Today I have two cards made with the dies.  This post features a gorgeous wedding card featuring the stunning Ornate Decorative Pocket die with a spray of beautiful Oakberry Lane flowers in pinks on a background of green leaves.

Products Used

Designer Dries Clear Adhesive159723
Crystal Ultrafine Transparent Glitter85-glitter
12 x 12 Cardstock Pack of 25 – WhiteHCPP3-452
Rajni Chawla’s Crystal ClearPGM15015
Classic Wedding Bells DieHCD1-7143
Classic Wedding Bells Cling Stamp SetHCPC-3789
Simply Classic DieHCD1-7159
Simply Classic Cling Stamp SetHCPC-3801
Eyelet Hearts DieHCD1-7162
Pastel Bead Stamens-MediumHCS1-457-3
Ranger Archival Ink Pad – Jet BlackRACP468
Ranger Archival Ink Pad – Library GreenRACP475
Ranger Archival Ink Pad – Vibrant FuchsiaRACP524
Ranger Archival Ink Pad – ButtercupRACP632
Ranger Archival Ink Pad – Pink PeonyRACP649
Ranger Archival Ink Pad – Fern GreenRACP962
Ranger Archival Ink Pad – Leaf GreenRACP436
Butterfly Kisses Decorative DieHCD1-7179
Oakberry Lane Blossoms Cling Stamp SetHCPC-3842
Oakberry Lane Blossoms DieHCD1-7200
3D Blossoms Shaping MoldHCFB1-469
Special Birthday Sentiments Cling Stamp SetHCPC-3843
Ornate Pocket Accents DieHCD1-7214
Zig Clean Color Real Brush Markers – 36 Pack478455

 

Other Products: Florist wire, iCraft Flora Super White cardstock, Pearls, Foam tape, Strathmore Bristol Smooth Cardstock, White organza ribbon

For more tips on creating with the pocket dies, watch the tutorial at https://youtu.be/uDhKUj9AAMo.

For more tips on creating with the Oakberry Lane collection, watch the tutorial at https://youtu.be/HirfUN8NEYY.

For more tips on creating with the flower shaping molds, watch the tutorial at https://youtu.be/FSdPL7nXvQE.

Instructions: Cut a piece of white cardstock 12″ x 7″, score at 6″ along the long side and fold to create a base card of 6″ x 7″. Die cut two pieces of the pocket accents die out of white cardstock and adhere to both ends of the card front. Die cut the decorative die from the HCD1-7179 Butterfly Kisses Decorative Die set in white cardstock. Cut a piece of white cardstock 3 1/2″ x 3 1/2″ and adhere the decorative die to the square card. Adhere to the base card with foam tape. Stamp the sentiment from the HCPC-3843 Special Birthday Sentiments stamp set in Jet Black ink on white cardstock. Die cut the sentiment using the plain edge die from the HCD1-7162 Eyelet Hearts Die set. Die cut the coordinating eyelet die from white cardstock and adhere the sentiment heart to this die and then adhere to the front of the diamond.

Stamp the blossom images in a variety of sizes from the HCPC-3842 Oakberry Lane Blossoms Stamp set in Vibrant Fuchsia ink on Super White cardstock. Colour the flowers with Buttercup and Pink Peony and die cut with the coordinating dies. Sponge the edges with the Vibrant Fuchsia ink before shaping the flowers in the coordinating mold and when dry assemble with two layers each flower. Add Crystal Clear glitter to the flowers with Dries Clear glue on a damp sponge. Pierce the centres of the flowers and insert the yellow bead stamens and fix with Dries Clear Glue. Ink the stems with Leaf Green ink and twist the stems together to create a larger bouquet and a smaller bouquet. Use florist tape to hold the bouquets together and then using a hot glue gun adhere the combined bouquets to the card front. Add an organza bow to the bouquet to cover the join.

Stamp the leaves from the HCPC-3842 Oakberry Lane Blossoms Stamp set in Library Green ink on Super White cardstock. Colour with a combination of Leaf Green, Fern Green and Vibrant Fuchsia inks and die cut with the coordinating die. Shape using the coordinating mold and when dry add Crystal Clear to the leaves with Dries Clear glue on a damp sponge. Add the leaves to the flowers.

Stamp the leaves from the HCPC-3801 Simply Classic Stamp set in Fern Green ink on Super White cardstock and colour with Leaf Green ink before die cutting with the coordinating die. Shape, trim and adhere around the bouquet.

Cut pieces of florist wire in varying lengths and curl around a pen and adhere around the bouquet with a hot glue gun. Add white bead stamens to the bouquet on both sides.

Stamp the bride and groom image from the HCPC-3789 Classic Wedding Bells Stamp set in Jet Black ink on Bristol Smooth cardstock. Colour in with Zig Clean Colour Brush markers and die cut with the coordinating die. Add Crystal Ultrafine glitter to the dress and veil with Dries Clear glue and adhere to the bottom right of the card with foam tape.

To finish, add pearls with Dries Clear glue on the decorative dies and under the sentiment as shown.

Please check out the amazing creations on the Heartfelt Creations blog here: https://www.heartfeltcreations.us/blog/768/black-friday-savings-inspiration

Happy Crafting

Ka Kite Anu

Patricia