Tag: diecutting

Amazing Paper Grace Graceful Birthday Wishes

On By patriciamanhireIn Patricia's CreationsLeave a comment

Kia ora Koutou

The first Amazing Paper Grace collection by Becca Feeken’s for Spellbinders was just gorgeous! The filigree details on her dies were stunning and the ability to emboss them just elevated them to a whole new level! For my card today I have used the Amazing Paper Grace Cascading Grace Pocket Dies from this collection to create a beautiful detailed background for a hot foiled sentiment, pretty flowers and finished with butterflies and pearls and of course a light dusting of glitter on the flowers.

Dies were provided by Amazing Paper Grace for today’s creations.

My Project

My base card is a side folding 5″ x 7″ card made from white cardstock. I cut a piece of white cardstock 4 7/8″ x 6 7/8″ and die cut the pockets from the Amazing Paper Grace Cascading Grace Pocket Dies using just the decorative insets and made sure I embossed both ends, I then die cut 4 pockets – two from white cardstock and two were from gold cardstock. the white pockets were embossed and the gold dies were adhered under the white dies slightly offset, before adding them to the decorative die cuts on the white panel. I then die cut the inner section out of the blue cardstock using the edge dies to cover the mid section. The entire panel was then added to a piece of 5″ x 7″ blue card.

I created a medallion by die cutting two ends of a piece of white cardstock using the half circle decorative die and the outer edge die from white cardstock. I die cut two separate medallion dies out of gold cardstock and added them under the white die cut sides slightly offsetting the gold dies. I then die cut a shadow out of blue cardstock using just the edge dies and adhered this behind the decorative dies. This medallion was added to the front of the card with foam tape.

I made a band using a combination of gold, white and blue cardstocks and added it across the centre of the card and wrapped over the edges and secured with double sided tape. This was then added to the front of the base card.

I die cut and embossed two decorative label dies from the Amazing Paper Grace Cascading Grace Dies from white cardstock, stacked them together before adding the label across the band with foam tape.

The sentiment is from the Amazing Paper Grace Filigree Crescent Band Hot Foil Plate set and has been reverse hot foiled with Aura foil and die cut using the small circle die from the Amazing Paper Grace Richelieu Square Dies. I die cut another two plain white circles which were all stacked together and added the foiled sentiment on top. I added the sentiment to the centre of the decorative label.

The leaves and rose buds and flowers have been handcrafted using the Amazing Paper Grace Candlewick Rosebud Etched Dies. The leaves were cut from light green cardstock and I have added Mowed Lawn ink to the edges before shaping the with my fingers and then adding them to the top left of the sentiment. I have used a soft floral shaping paper for the flowers and coloured them with a soft pink ink before assembling them. I have used the sepal de from the Amazing Paper Grace Cinch and Go Flowers III Dies on the rosebuds before adding them over the leaves.

I added small blue flowers made using dies from the Amazing Paper Grace Petite Floral Potpourri Etched Dies around the roses and leaves.

To finish the card I have made three butterflies from the Amazing Paper Grace Garden Shutter Butterfly Bliss Etched Dies from blue, white and gold cardstocks with black bodies and some pearls on the decorative dies. A light dusting of Sparkle dust on the flowers and leaves finishes the card.

Amazing Paper Grace Products Used:

Cascading Grace Pocket Dies

Cascading Grace Dies

Garden Shutter Butterfly Bliss Etched Dies

Candlewick Rosebud Etched Dies

Cinch and Go Flowers III Dies

Petite Floral Potpourri Etched Dies

Filigree Crescent Band Hot Foil Plate

Richelieu Square Dies – Circle die to cut out sentiment

Other Products Used:

Concord & 9th Cardstock – Sprout

Spellbinders Essentials Cardstock – Glacier, Onyx

DMC Flower Shaping Paper

DMC Wire Yellow Pollens

Heartfelt Creations Luxe Gold Cardstock

Hammermill White Cardstock 

House of Paper Cardstock – White 300 gsm

Small and medium ball stylus

Spellbinders Foil – Aura

DMC Sparkling Dust

Pink Fresh Studio Hot Foil Plate

Pretty Pink Posh Pearls – Marshmallow

Neenah Classic Crest 80 lb cardstock

Neenah Classic Crest 110 lb cardstock

Bearly Art Glue

My Sweet Petunia Precision Glue Press

Foam Tape

Pink Fresh Studio inks – Lemon Whip, Sparkling Rose

Distress Ink – Mowed Lawn

Follow me on Facebook!

Follow me on Instagram!

Follow me on YouTube!

Happy Crafting

Patricia

Tweet Notes

On By patriciamanhireIn Patricia's Creations2 Comments

Kia Ora Koutou

I have another card to share with you featuring the beautiful new Filigree Frames & Borders dies from Heartfelt Creations. The Rectangle Filigree Frame Die works perfectly with the new Hollyhock Garden collection to create a beautiful garden scene.

For more details of the products I have used please visit here: https://www.heartfeltcreations.us/gallery/tweet-notes

Today’s project was created with products provided by Heartfelt Creations.

Scroll down past the photos for instructions on how to make this card.

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 10” x 7”, score at 5” along the long side and fold to create a base card of 5” x 7”.  Cut a piece of gold cardstock 5” x 7” and adhere to the front of the card.  Cut a piece of green pattern paper 4 7/8” x 6 7/8” and adhere to the front of the gold cardstock.

Die cut two outer decorative frames using the No. 1 die from the HCD2-7424 Rectangle Filigree Frame Die – one out of Deluxe Flower Shaping Paper and one out of gold cardstock.  Adhere the white decorative frame over the gold frame slightly offsetting the dies and then adhere to the front of the card.  Die cut two medium decorative frames using the No. 2 die from the HCD2-7424 Rectangle Filigree Frame Die – one out of Deluxe Flower Shaping Paper and one out of gold cardstock. Adhere the white decorative frame over the gold decorative frame slightly offset them before adhering to the card front inside the outer frame..  Die cut the pattern paper using the No.2 die from the HCD2-7424 Rectangle Filigree Frame Die and adhere the inner panel inside the frame as shown.

Stamp the fence from the HCPC-31001 Hollyhock Fence Cling Stamp Set in Black Onyx ink on Iris cardstock.  Colour the fence with Zig Clean Colour Real Brush Markers and die cut with the coordinating die.  Trim the fence in half and adhere to the base of the inner decorative die with foam tape.

Trim the sentiment from the paper collection and adhere to the centre of the frame as shown.

Stamp the small leaf images from the HCPC-3999 Hollyhock Petals & Leaves Cling Stamp Set in English Ivy ink on Deluxe Flower Shaping Paper.  Colour with Leaf Green ink and die cut with the coordinating dies.  Colour the backs with Leaf Green ink and shape using the coordinating mold.  Add Crystal Clear glitter using clear gloss gel medium and adhere to the base of the fence.

Stamp the flower images from the HCPC-3999 Hollyhock Petals & Leaves Cling Stamp Set in Sunflower  and Magenta Hue inks.  Colour the petals and backs of the yellow flowers with Citrus Burst ink and the centres with Lilac Posies  ink and die cut with the coordinating dies.  Colour the petals and backs of the Magenta Hue flowers with Cotton Candy ink.  Shape using the coordinating mold.  Add the flowers to the leaves with the larger flowers on the bottom and the smaller flowers at the top of the gate as shown.  Add Hot Mama Prills to the centres of the flowers and then add Crystal Clear glitter using clear gloss gel medium.

Stamp the butterfly and birds images from the HCPC-3965 Summer  Wreath Accents Cling Stamp in Jet Black ink on Iris Cardstock.  Colour the images using Zig Clean Colour Real Brush Markers and die cut with the coordinating dies.  Adhere to the card as shown.

To finish add Crystal Ultrafine Glitter using Dries Clear glue to the floral images on the paper and dot on the back ground of the paper.

Other Products Used:

Iris cardstock, Versafine Black Onyx ink, foam tape, clear gloss gel medium, paintbrush, Altenew inks – Cotton Candy and Citrus Burst

Follow me on Facebook!

Follow me on Instagram!

Follow me on YouTube!

Happy Crafting

Patricia

Sweet Magnolia Blooms and Buds

On By patriciamanhireIn Patricia's Creations4 Comments

Kia Ora Koutou

I have a beautiful congratulations card with some more Sweet Magnolia blooms and buds to share with you today for Inspiration Wednesday at Heartfelt Creations. Remove the dimensional flowers and you have the perfect card to post in an envelope!

Products Used:

Sweet Magnolia Blooms Die, HCD1-7346
Sweet Magnolia Buds Die, HCD1-7347
Sweet Magnolia Bouquet Die, HCD1-7348
Sweet Magnolia Blooms Cling Stamp Set, HCPC-3948
Sweet Magnolia Buds Cling Stamp Set, HCPC-3949
Sweet Magnolia Bouquet Cling Stamp Set, HCPC-3950
Sweet Magnolia Paper Collection, HCDP1-2126
3D Magnolia Shaping Mold, HCFB1-5005
Regal Lattice Gateway Die, HCD2-7339
Ornamental Tags Die, HCD1-7203
Celebrate Love Sentiments Cling Stamp Set, HCPC-3847
Deluxe Flower Shaping Paper Pack of 50 – White, HCPP1-475
Deluxe Flower Shaping Kit, HCST1-401
Luxe Silver Cardstock, HCGP1-493
Stack and Store Daubers-Pack of 30, HCDA2-450
Pastel Bead Stamens-Medium, HCS1-457-3
Bright Pearl Stamens-Small, HCS1-458-1
Designer Dries Clear Adhesive, 159723
Rajni Chawla’s Crystal Clear, PGM15015
Ranger Archival Ink Pad – Library Green, RACP475
Ranger Archival Ink Pad – Vivid Chartreuse, RACP531
Ranger Archival Ink Pad – Cactus Flower, RACP985
Ranger Archival Ink Pad – Magenta Hue, RACP614
Ranger Archival Ink Pad – Pink Peony, RACP649
Ranger Archival Ink Pad – Jet Black, RACP468
Zig Clean Color Real Brush Markers – 48 Pack, 478594
Darice Adhesive Foam Strips, D120601

Other Products:

Foam tape, Iris cardstock, clear gloss gel medium

Instructions:

Cut a piece of Deluxe Flower Shaping Paper 10” x 7”, score at 5” along the long side and fold to create a base card 5” x 7”. Cut a piece of silver cardstock 5” x 7” and adhere to the front of the card. Cut a piece of pattern paper 4 7/8” x 6 7/8” and adhere to the front of the silver card. Die cut the outer frame from the HCD2-7339 Regal Lattice Gateway Die set out of silver cardstock using the No. 1 and 2 dies. Adhere to the front of the card with foam strips. Die cut the inner lattice using the No. 2 and No. 3 dies from the HCD2-7339 Regal Lattice Gateway Die set out of silver cardstock and insert into the centre of the frame.

Die cut two outer decorative tag dies from the HCD1-7203 Ornamental Tags Die set out of silver cardstock and adhere together. Stamp the sentiment from the HCPC-3847 Celebrate Love Sentiment Cling Stamp Set in Cactus Flower ink on green pattern paper and die cut with the inner rectangle die from the HCD1-7203 Ornamental Tags Die set. Adhere the sentiment on the tag and adhere to the front of the card as shown with foam tape.

Stamp the magnolia branch images from HCPC-3949 Sweet Magnolia Buds Cling Stamp Set and the HCPC-3950 Sweet Magnolia Bouquet Cling Stamp Set in Jet Black ink on Iris cardstock. Colour the images with Zig Clean Colour Brush Markers and die cut with the coordinating dies. Adhere the semi-circle branch at the top of the frame as shown with foam tape. Trim and adhere the other dies to the left of the card front above and below the tag as shown.

Stamp the leaf images from the HCPC-3948 Sweet Magnolia Blooms Cling Stamp Set in Library Green ink on Deluxe Flower Shaping Paper. Colour the leaves with Vivid Chartreuse and Library Green inks and die cut with the coordinating dies. Colour the back of the leaves with Vivid Chartreuse ink and shape using the coordinating mold. Colour the back of the leaves with Vivid Chartreuse ink and shape using the coordinating mold. Add Crystal Clear glitter using clear gloss gel medium. Adhere to the bottom right below the tag as shown.

Stamp the magnolia images from the HCPC-3948 Sweet Magnolia Blooms Cling Stamp Set in Cactus Flower ink on Deluxe Flower Shaping Paper. Colour with Pink Peony ink and die cut with the coordinating dies. Colour the backs of the flowers with Magenta Hue ink and then shape using the coordinating mold. Assemble using two of each size flowers. Add a single yellow bead stamen and magenta small pearl stamens to the flowers with hot glue. For the buds, stamp the small flowers on Deluxe Flower Shaping Paper in Library Green ink. Colour the flowers with Vivid Chartreuse ink and the centres with Library Green ink and die cut with the coordinating die. Colour the backs of the flowers with Vivid Chartreuse ink and then shape using the coordinating mold. Shape two pink flowers into buds using a hot glue gun and then adhere the green petal to the base of the bud as shown. Add Crystal Clear glitter with clear gloss gel medium. Adhere a large and small flower and a bud over the flowers.

Follow me on Facebook!

Follow me on Instagram!

Follow me on YouTube!

Happy Crafting

Ka Kite Anu

Patricia